Bison Vinyl Plastic glue for plasticized plastics with 25 ml waterproof patch
Degrease, clean and dry the glued surface. Adjust the attached foil to a round shape, 1-2 cm larger than the hole/tear. Apply a thin layer of adhesive to both surfaces, allow to dry for about 5-10 minutes and press firmly togEther for a few seconds. Inflatable objects: wait at least 6 hours (at +20°C) before re-inflating the object. Gluing and repairing underWater: prepare a patch of the right size - preferably larger. Apply the adhesive to the patch. Immediately immerse in Water and apply to the damaged area (e.g. torn pool liner). Leave for at least 12 hours without straining. DONE!
TIP:
For hard plastics use BISON PLASTIC - welding adhesive for bonding hard plastics - cold welding.
WARNING:
Do not use at temperatures below +10°C. Not suitable for Polyethylene (PE) films. Remove unwanted drops immediately with acetone. Store in a cool, dry place. The minimum shelf life is 24 months.
Keep out of reach of children. Ensure adequate air supply when breathing. In case of contact with eyes, rinse immediately with Water. If swallowed, do not induce vomiting and seek medical attention immediately.
This item has not been discussed yet. If you want to be first, click on the button Add a contribution
Degrease, clean and dry the glued surface. Adjust the attached foil to a round shape, 1-2 cm larger than the hole/tear. Apply a thin layer of adhesive to both surfaces, allow to dry for about 5-10 minutes and press firmly togEther for a few seconds. Inflatable objects: wait at least 6 hours (at +20°C) before re-inflating the object. Gluing and repairing underWater: prepare a patch of the right size - preferably larger. Apply the adhesive to the patch. Immediately immerse in Water and apply to the damaged area (e.g. torn pool liner). Leave for at least 12 hours without straining. DONE!
TIP:
For hard plastics use BISON PLASTIC - welding adhesive for bonding hard plastics - cold welding.
WARNING:
Do not use at temperatures below +10°C. Not suitable for Polyethylene (PE) films. Remove unwanted drops immediately with acetone. Store in a cool, dry place. The minimum shelf life is 24 months.
Keep out of reach of children. Ensure adequate air supply when breathing. In case of contact with eyes, rinse immediately with Water. If swallowed, do not induce vomiting and seek medical attention immediately.