Motip Škoda Acrylic car paint spray AE 9595 Green emerald metallic 150 ml
Code: | 2006274 |
EAN: | 4048500860041 |
Producer: | Motip Dupli |
Brand: | Motip (web) |
Hořlavé: | Hořlavé |
- Read and follow the warning texts on the label carefully before use!
- Clean the surface of dirt, grease and rust.
- If necessary, treat the resulting corroded areas with presto Rust Stop.
- Fill and sand uneven surfaces.
- Thoroughly cover the area to be repaired with masking tape.
- Larger areas should also be covered at the creases and edges of the bodywork.
- Apply MoTip Filler or spray sealant to the finely sanded surface.
- First, sand the sealant layer with P600 sandpaper, then prepare the surface for finishing with MoTip filler or MoTip base.
- Wet sand thoroughly and smoothly the dried layer of sealant (P1000 sandpaper).
- Pre-treat plastic parts with MoTip plastic primer.
Painting:
The surface must be clean, dry and free of grease. Shake the container thoroughly for 3 minutes before use. Test whEther the spray shade matches the original paint. Apply the paint from a distance of approximately 20-30 cm. Apply several thin coats at intervals of 3-5 minutes. Do not spray on surfaces treated with synthetic paint!
2-coat clearcoat:
Metallic paints should be treated with clearcoat 30 minutes after application. This prevents weathering and environmental influences from attacking the aluminium particles in the paint.
Hořlavé
Nebezpečí
Extrémně hořlavý plyn. Hořlavý plyn. Extrémně hořlavý aerosol. Hořlavý aerosol. Vysoce hořlavá kapalina a páry. Hořlavá kapalina a páry. Hořlavá tuhá látka.
Varování. Pokyny pro bezpečné zacházení
Před použitím protřepat. Vyvarujte se přímému vdechování. Nestříkejte do otevřeného ohně nebo jiných zdrojů zapálení. Chraňte před teplem / jiskrami / otevřeným plamenem / horkými povrchy. – Zákaz kouření. Uchovávejte obal těsně uzavřený. Uchovávejte v chladu. Nevystavujte teplotě přesahující 50°C . Nádobka je pod tlakem: při zahřívání se může roztrhnout. Chraňte před slunečním zářením. Uchovávejte mimo dosah dětí.
This item has not been discussed yet. If you want to be first, click on the button Add a contribution
- Read and follow the warning texts on the label carefully before use!
- Clean the surface of dirt, grease and rust.
- If necessary, treat the resulting corroded areas with presto Rust Stop.
- Fill and sand uneven surfaces.
- Thoroughly cover the area to be repaired with masking tape.
- Larger areas should also be covered at the creases and edges of the bodywork.
- Apply MoTip Filler or spray sealant to the finely sanded surface.
- First, sand the sealant layer with P600 sandpaper, then prepare the surface for finishing with MoTip filler or MoTip base.
- Wet sand thoroughly and smoothly the dried layer of sealant (P1000 sandpaper).
- Pre-treat plastic parts with MoTip plastic primer.
Painting:
The surface must be clean, dry and free of grease. Shake the container thoroughly for 3 minutes before use. Test whEther the spray shade matches the original paint. Apply the paint from a distance of approximately 20-30 cm. Apply several thin coats at intervals of 3-5 minutes. Do not spray on surfaces treated with synthetic paint!
2-coat clearcoat:
Metallic paints should be treated with clearcoat 30 minutes after application. This prevents weathering and environmental influences from attacking the aluminium particles in the paint.
Hořlavé
Nebezpečí
Extrémně hořlavý plyn. Hořlavý plyn. Extrémně hořlavý aerosol. Hořlavý aerosol. Vysoce hořlavá kapalina a páry. Hořlavá kapalina a páry. Hořlavá tuhá látka.
Varování. Pokyny pro bezpečné zacházení
Před použitím protřepat. Vyvarujte se přímému vdechování. Nestříkejte do otevřeného ohně nebo jiných zdrojů zapálení. Chraňte před teplem / jiskrami / otevřeným plamenem / horkými povrchy. – Zákaz kouření. Uchovávejte obal těsně uzavřený. Uchovávejte v chladu. Nevystavujte teplotě přesahující 50°C . Nádobka je pod tlakem: při zahřívání se může roztrhnout. Chraňte před slunečním zářením. Uchovávejte mimo dosah dětí.