Alteco Epoxy Steel 30 min two-component epoxy adhesive with filler 56.8 g

Glued parts must be clean, dry and degreased. Squeeze out the filler and hardener in a volume ratio of 1 : 1 (two equal strips) and mix well. The workability of the adhesive is 30 minutes at room temperature. Apply the adhesive on one side, or on both sides for rough and porous materials, press both surfaces together and fix (using clamps or tape). Clean and seal the ends of the tubes properly. Final functional strength after 24 hours. The minimum working temperature is 15°C. Store in a dry and cool place.