Alteco A+B Epoxy Putty 30 min epoxy putty 100 g

The parts to be glued must be clean and degreased. Cut off the necessary amount of compound A and B and remove the protective foil. Work the compound so that it is the same colour. Work the compound firmly into the area to be repaired. The workability of the plasticine is 30 minutes at room temperature. The minimum working temperature is +5°C. Store in a dry and cool place.

Cracks, fissures:
If you are repairing a crack or tear, apply enough plasticine to the damaged area and press it in with force so that the plasticine fills the entire damaged area. Then, shape the plasticine to the desired shape using common tools or moistened fingers. Once cured, you can sand and paint the plasticine.
Excellent for repairing: cracks in stairs, tiles, concrete, metals, granite slabs (grave repairs), ... Once cured, it can be sanded, drilled and repainted.

Seepage, leakage:
Very often you need to repair a leaking drain, valve, tap, etc. Simply apply plasticine directly to the damaged area. If the leak is more severe or the liquid is leaking under pressure, fix the plasticine on the damaged area with fixing tape for at least 3 hours. After that, remove the tape. You can sand and repaint.
Allows repair of: dripping valves, pipes, boilers, sink and toilet drains, gutters, punctured tanks and radiators, ..

Material replacement:
A common damage is the chipping of a piece of material (step, flowerpot, granite slab, etc.) that needs to be replaced. Here the use of Alteco Epo Putty is a must. The long workability allows us to apply the plasticine well and, above all, to shape the plasticine to the desired shape in the 30 minutes available. After curing, it can be sanded, drilled and repainted.
It fills in: missing parts of stone sills, tombstones, tools (rake, shovel, mower, pump). It perfectly anchors e.g. rolled dowels.