Bison Poly Max Crystal Express quick-drying universal assembly adhesive and sealant Clear 115 g
It is designed for bonding and mounting PVC, ABS, metals, stone, glass, various plastics on various materials such as metals, plastics, glass, marble, stone, plexiglass, tiles, etc. It is also suitable for assembly bonding of mirrors to smooth surfaces and for bonding polyStyrene foam to metals (e.g. garage door insulation), for paving, tiles, etc.
Bonding and fixing: the bonded surfaces must be dry and dust-free. Apply the adhesive in dots or strips on one side and press togEther. For heavy materials, fix the glued parts for 2 hours. The joint reaches full strength after 4 hours (condition: at least one material must be porous). The glued parts can be corrected in a few minutes. The minimum working temperature is +5 °C. Uncured adhesive can be removed with a wet cloth. Store in a cool and dry place, the glue must not freeze.
Sealing: apply sealant evenly to joints. Smooth with a damp (Water and detergent without Lemon) squeegee, spatula or finger within 10 minutes. Seal vertical joints from the bottom up. The surface is dry within approx. 15 minutes. Complete curing occurs after a few days (depending on the thickness) - the curing rate is approximately 2 mm/24 hours.
Use between +5°C and +40°C. Shelf life 18 months, can be shortened after opening.
Not classified under CLP.
This item has not been discussed yet. If you want to be first, click on the button Add a contribution
It is designed for bonding and mounting PVC, ABS, metals, stone, glass, various plastics on various materials such as metals, plastics, glass, marble, stone, plexiglass, tiles, etc. It is also suitable for assembly bonding of mirrors to smooth surfaces and for bonding polyStyrene foam to metals (e.g. garage door insulation), for paving, tiles, etc.
Bonding and fixing: the bonded surfaces must be dry and dust-free. Apply the adhesive in dots or strips on one side and press togEther. For heavy materials, fix the glued parts for 2 hours. The joint reaches full strength after 4 hours (condition: at least one material must be porous). The glued parts can be corrected in a few minutes. The minimum working temperature is +5 °C. Uncured adhesive can be removed with a wet cloth. Store in a cool and dry place, the glue must not freeze.
Sealing: apply sealant evenly to joints. Smooth with a damp (Water and detergent without Lemon) squeegee, spatula or finger within 10 minutes. Seal vertical joints from the bottom up. The surface is dry within approx. 15 minutes. Complete curing occurs after a few days (depending on the thickness) - the curing rate is approximately 2 mm/24 hours.
Use between +5°C and +40°C. Shelf life 18 months, can be shortened after opening.
Not classified under CLP.