Bison Poly Max Express White quick-drying universal assembly sealant White 165 g
Gluing and fixing
The glued surfaces must be dry and dust-free. Apply the adhesive in dots or strips on one side and press togEther. For heavy materials, fix the glued parts for 2 hours. The joint reaches full strength after 4 hours (condition: at least one material must be absorbent - with non-absorbent materials the final strength is reached after a longer time). The glued parts can be corrected in a few minutes. The minimum working temperature is +5 °C. Uncured adhesive can be removed with a wet cloth. Store in a cool and dry place, the glue must not freeze.
Sealing:
Apply sealant evenly into the joints. Smooth with a damp (Water and detergent without Lemon) squeegee, spatula or finger within 10 minutes. Seal vertical joints from the bottom up. The surface is dry within approx. 15 minutes. Coplet curing occurs after a few days (depending on the thickness) - the curing rate is approximately 2 mm/24 hours.
Tip:
For transparent joints, use Bison Poly Max Crystal Express.
Use between +5°C and +40°C.
Shelf life 18 months, can be shortened after opening.
Technical properties:
Moisture resistance: very good
Water resistance: good
Temperature resistance: from -40 to +100 degrees Celsius
UV resistance: very good
CheMical resistance: good
Paintability: paintable with acrylic and alkyd paints. Alkyd paints can slow down the time it takes for the joint to mature. Always test first.
Flexibility: good
Filling ability: very good
The product does not contain substances classified as dangerous within the meaning of Regulation (EC) No 1272/2008.
This item has not been discussed yet. If you want to be first, click on the button Add a contribution
Gluing and fixing
The glued surfaces must be dry and dust-free. Apply the adhesive in dots or strips on one side and press togEther. For heavy materials, fix the glued parts for 2 hours. The joint reaches full strength after 4 hours (condition: at least one material must be absorbent - with non-absorbent materials the final strength is reached after a longer time). The glued parts can be corrected in a few minutes. The minimum working temperature is +5 °C. Uncured adhesive can be removed with a wet cloth. Store in a cool and dry place, the glue must not freeze.
Sealing:
Apply sealant evenly into the joints. Smooth with a damp (Water and detergent without Lemon) squeegee, spatula or finger within 10 minutes. Seal vertical joints from the bottom up. The surface is dry within approx. 15 minutes. Coplet curing occurs after a few days (depending on the thickness) - the curing rate is approximately 2 mm/24 hours.
Tip:
For transparent joints, use Bison Poly Max Crystal Express.
Use between +5°C and +40°C.
Shelf life 18 months, can be shortened after opening.
Technical properties:
Moisture resistance: very good
Water resistance: good
Temperature resistance: from -40 to +100 degrees Celsius
UV resistance: very good
CheMical resistance: good
Paintability: paintable with acrylic and alkyd paints. Alkyd paints can slow down the time it takes for the joint to mature. Always test first.
Flexibility: good
Filling ability: very good
The product does not contain substances classified as dangerous within the meaning of Regulation (EC) No 1272/2008.