Colorlak S 2802 A deep penetration concentrated primer 1 l
| Code: | 17770 |
| EAN: | 8590198163790 |
| Producer: | Colorlak a.s. |
| Brand: | Colorlak (web) |
 | |
Hloubkový penetrační nátěr určený ke zpevnění starých a zvětralých omítek. Snižuje nebo sjednocuje savost podkladu a zvyšuje přilnavost následných vrstev, zlepšuje vlastnosti stavebních směsí.
- sjednocení nasákavosti podkladu před nátěrem malířských a fasádních barev
- zpevnění podkladu před vyrovnáváním podlah samonivelačními hmotami
- pod všechny druhy nátěrových hmot
- aditivum stavebních hmot
- lokální opravy podkladních betonů a zdiva
- příprava podkladu před lepením obkladů a dlažeb
- transparentní
Application:at temperature (air and substrate) +5 to +25 oC
- by roller
- brush
- spraying
Application:
After priming and impregnation of new and old masonry and plaster, Gypsum materials, chipboard and fibreboard, screed and lightweight materials.
Substrate:
The substrate shall be dry, cohesive, free from dust and dirt and Waterproofed.
Thinner:
Water
Recommended dilution:
1 part Penetration 2802 A and 1 to 10 parts Water, for thorough penetration on very absorbent substrates 1 part Penetration 2802 A and 10 parts Water.
Yield:
10 - 25 m2/l for one recommended coating. Shade: milky white.
Warning:
Very absorbent substrates (SDK, Gypsum plasters and slates, interior stucco, etc.): Penetration S2802A is diluted with Water, at a ratio of 1 part Penetration S2802A and 7 to 10 parts Water, and the application of the primer is repeated (2 coats in total).
After drying for 4-6 hours, the application of interior paint is followed by the application of interior paint,
Common absorbent substrates (concrete, masonry and older coatings),
Penetration under facade acrylic paint (exterior): Penetration S2802A is diluted with Water, in the ratio of 1 part Penetration S2802A and 1 to 2 parts Water, priming is done only once.
Aqueous solution of Styrene acrylate dispersion with special additives.
Occupational safety and hygiene: Protect your skin with gloves when working, do not eat, drink or smoke. After work, wash hands with Water and treat with a restorative cream. In case of eye contact, flush with a stream of Water for about 10 minutes and seek medical attention. Keep out of reach of children.
This item has not been discussed yet. If you want to be first, click on the button Add a contribution
Hloubkový penetrační nátěr určený ke zpevnění starých a zvětralých omítek. Snižuje nebo sjednocuje savost podkladu a zvyšuje přilnavost následných vrstev, zlepšuje vlastnosti stavebních směsí.
- sjednocení nasákavosti podkladu před nátěrem malířských a fasádních barev
- zpevnění podkladu před vyrovnáváním podlah samonivelačními hmotami
- pod všechny druhy nátěrových hmot
- aditivum stavebních hmot
- lokální opravy podkladních betonů a zdiva
- příprava podkladu před lepením obkladů a dlažeb
- transparentní
Application:at temperature (air and substrate) +5 to +25 oC
- by roller
- brush
- spraying
Application:
After priming and impregnation of new and old masonry and plaster, Gypsum materials, chipboard and fibreboard, screed and lightweight materials.
Substrate:
The substrate shall be dry, cohesive, free from dust and dirt and Waterproofed.
Thinner:
Water
Recommended dilution:
1 part Penetration 2802 A and 1 to 10 parts Water, for thorough penetration on very absorbent substrates 1 part Penetration 2802 A and 10 parts Water.
Yield:
10 - 25 m2/l for one recommended coating. Shade: milky white.
Warning:
Very absorbent substrates (SDK, Gypsum plasters and slates, interior stucco, etc.): Penetration S2802A is diluted with Water, at a ratio of 1 part Penetration S2802A and 7 to 10 parts Water, and the application of the primer is repeated (2 coats in total).
After drying for 4-6 hours, the application of interior paint is followed by the application of interior paint,
Common absorbent substrates (concrete, masonry and older coatings),
Penetration under facade acrylic paint (exterior): Penetration S2802A is diluted with Water, in the ratio of 1 part Penetration S2802A and 1 to 2 parts Water, priming is done only once.
Aqueous solution of Styrene acrylate dispersion with special additives.
Occupational safety and hygiene: Protect your skin with gloves when working, do not eat, drink or smoke. After work, wash hands with Water and treat with a restorative cream. In case of eye contact, flush with a stream of Water for about 10 minutes and seek medical attention. Keep out of reach of children.
