Industrol Plus top coat for metal and wood S2071, 1000 white, 750 ml

Topcoat synthetic glossy fast-drying urethanized.

CHARACTERISTICS AND USE:

For final top coats for metal and wood exposed to direct weather conditions as well as for coatings in interiors. It features fast drying, excellent flow, and high gloss. It is also suitable for industrial applications. Examples of use - painting doors, frames, wooden furniture and paneling, wooden fences, gutters, window sills, structures, garden furniture, trolleys, small industrial items, washable and abrasion-resistant wall coatings.

Key properties:

• Long-lasting durability
• Accelerated drying
• Excellent flow

SUBSTRATE PREPARATION:

Wood must be clean, dry, well-sanded, with a maximum moisture content of 12%, free of resin residues, before application. The concrete or masonry substrate must be dry, cohesive, cleaned, well-cured (usually 4 - 6 weeks), and constructionally insulated against ground (bottom) moisture. The metal substrate must be clean, dry, free of grease, rust, and dust, mechanically cleaned. Absorbent substrates must be further impregnated with a suitable primer and optionally treated with an appropriate base material. Metallic substrates must be treated with an appropriate anti-corrosive primer. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adhering coatings.

DILUTION: thinner BALTECH S6006 (brush, roller), thinner BALTECH S6001 (spraying)

Theoretical coverage: 14 - 16 m2/l in one coat

APPLICATION PROCEDURE:

Before use, thoroughly mix the contents and dilute as necessary.
Coating metal objects
1.  1 coat of primer PRAGOPRIMER STANDARD S2000, FORMEX PRIMER FOR GALVANIZED S2003, PRAGOPRIMER UNIVERSAL S2035 or PRAGOPRIMER PRO S2129
2.  local filling with putty, e.g., BKP RAPID, sanding the filled area with sandpaper
3.  1 coat of primer PRAGOPRIMER STANDARD S2000, FORMEX FOR GALVANIZED S2003, PRAGOPRIMER UNIVERSAL S2035 or PRAGOPRIMER PRO S2129
4.  sanding with sandpaper no. 280-320 wet
5.  2 to 3 coats of topcoat INDUSTROL PLUS S2071. The optimal thickness of one layer is 30 - 35 mm.

Coating wooden objects:
1. 1 coat of impregnation glaze LAZUROL CLASSIC S1023 or UNIBAL IMPREGNATING VARNISH O1000, drying for 24 hours
2. 1 to 2 coats of primer PRAGOPRIMER PLUS S2070 or LAZUROL WINDOW BASE S2060
3. 2 to 3 coats of topcoat INDUSTROL PLUS S2071. Each coat must dry for at least 24 hours (20 °C). The optimal thickness of one layer is 30-35 mm.

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Dangerous respirable droplets may be created when spraying. Do not breathe aerosols or mist.
• H226: Flammable liquid and vapor.
• H317: May cause an allergic skin reaction.
• H319: Causes serious eye irritation.
• H412: Harmful to aquatic life with long-lasting effects.

Safety handling instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapor/aerosol.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with local regulations.