Kittfort Fireclay lubricating compound Profi 1 kg

Preparation of the mortar and mortar: according to the scope of the repair, we decide how much mortar to prepare at a time. For the whole pack you need to prepare a solution of water and water glass (200 ml in total) in a ratio of 1:1 (i.e. 100 ml of water glass and 100 ml of water) Pour the contents of the bag (1 kg) into a container and pour the prepared solution, mix well and leave approx. 3 min. to lie low. Then mix lightly and the mortar is ready for use. Prepare only the amount that can be processed within 2 hours. In case of interruption, lightly smooth in a bucket and pour 1mm of water. This prevents drying out and the work can be continued by pouring water.

Construction and repair of fireplaces
When building new fireplaces, we mainly observe the maximum mortar layer of up to 5mm. I also lightly dampen the fireclay bricks, elements before the actual construction!!!

When joining and repairing damaged lining, proceed as follows
The repaired areas are moistened with water, then filled with prepared mortar and smoothed on the surface. Depending on the size and extent of the repair, the repaired firebox is allowed to dry for 12-24 hours. It is then dried under moderate heat (2-6 hours) until the repaired areas are perfectly hardened.

Gluingon metal substrate
The substrate is stripped of all greasy dirt and especially rust. We recommend using the Profi Cutter (Kittfort product range). It is recommended to coat the substrate with thinner mortar before gluing. Let the layer dry and then glue it. The mortar can also be used to protect and clean internal linings and furnaces and metal parts exposed to high temperatures. The mortar can be used in all places where the temperature does not exceed 1400 °C.

Safety instructions:Wear protective gloves, protective clothing and safety glasses or face shield when working. Follow basic hygiene rules! Wash your hands after work, if necessary. the affected skin with soap and water and treat with a suitable reparative cream. In case of eye contact, flush eyes with running water, in case of accidental ingestion rinse mouth, drink 0.5 l of water and seek medical attention. In more serious cases, always seek medical attention.

Technical data:
Al 2 033 ....38-40%
SiO 2 ........50-55%
TiO 2 ........1,8-2,8%

Water/water glass thinner 1:1
Storage: in a dry environment at temperatures between +5°C and 25°C in closed, intact containers.