Labar Glass Putty 1 kg

Preparation of the substrate
before glazing, the window frame must be treated, including the half-groove (the place for the glass to be placed), by impregnation with linen fermse or primer paint. Metal frames and parts must be painted with anti-corrosive paint.

Sealant preparation and sealing
prepare the putty by kneading it in the hand into a doughy mass. When glazing, apply a thin layer in the half-groove and place the glass so that it adheres all around the perimeter. The glass is secured with extensions. The putty is then pressed into the half-groove in which the glass is placed using a glass cutter. When the half-groove is filled, smooth the surface of the putty with a knife.

The sealant dries superficially within 24 hours at room temperature, but can only be recoated with paint after 14 days. After 1 month at the latest, the sealant layer must be recoated with a base and top coat of oil, synthetic or dispersion paint. Cover the unused sealant with foil and seal it well.

Shade and thinner: 0605 - grey-beige light, linen fermé. After washing, drying, put in the sorted waste.

When working, observe the principles of personal hygiene, do not drink, eat or smoke. After work, wash your hands with soap and water, treat your skin with a reparative cream.