Plantella BIo adhesive tape for tree protection 5 m
Code: | 56202 |
EAN: | 3830001595994 |
Producer: | Unichem, Slovinsko |
Brand: | PLANTELLA BIO (web) |
Product type: | Přírodní produkt |
- Fix the adhesive strip to the trees at a height of approx. 50-60 cm above the ground.
- Measure the length (around the tree trunk) and after wrapping the trunk - just tape the edges over each other.
- Stick the belt tightly not only around the trunk and branches of the trees but also around the supporting wedges.
- Since the glue is applied on both sides of the strip, it not only prevents wandering over the outside of the strip, but also from sliding down the tree trunk.
- Replace the double-sided adhesive tape with a new one as soon as the adhesive area becomes covered with insects or the surface becomes dusty.
Health and safety at work. The adhesive used is not dangerous to humans. However, the manufacturer recommends observing basic hygiene principles. Wash your hands after application. When the pest trapping is finished, place the used plates in a PE bag and dispose of them in the municipal waste. Keep the adhesive tape away from sources of open flame. The risk arising from the use of the product is acceptable for bees and other non-target arthropods when the application rate is correctly observed. The product, its residues and used packaging must not enter surface Water. Avoid contamination of the Water with the auxiliary agent or packaging. In case of accidental ingestion, do not induce vomiting. Transport the casualty to a doctor and show this label. If hands are splashed, wash affected areas with warm Water and soap. If necessary, therapy can be consulted with the Toxicology Information Centre: the Toxicology Information Centre - Clinic for Occupational Diseases.
This item has not been discussed yet. If you want to be first, click on the button Add a contribution
Product type: | Přírodní produkt |
- Fix the adhesive strip to the trees at a height of approx. 50-60 cm above the ground.
- Measure the length (around the tree trunk) and after wrapping the trunk - just tape the edges over each other.
- Stick the belt tightly not only around the trunk and branches of the trees but also around the supporting wedges.
- Since the glue is applied on both sides of the strip, it not only prevents wandering over the outside of the strip, but also from sliding down the tree trunk.
- Replace the double-sided adhesive tape with a new one as soon as the adhesive area becomes covered with insects or the surface becomes dusty.
Health and safety at work. The adhesive used is not dangerous to humans. However, the manufacturer recommends observing basic hygiene principles. Wash your hands after application. When the pest trapping is finished, place the used plates in a PE bag and dispose of them in the municipal waste. Keep the adhesive tape away from sources of open flame. The risk arising from the use of the product is acceptable for bees and other non-target arthropods when the application rate is correctly observed. The product, its residues and used packaging must not enter surface Water. Avoid contamination of the Water with the auxiliary agent or packaging. In case of accidental ingestion, do not induce vomiting. Transport the casualty to a doctor and show this label. If hands are splashed, wash affected areas with warm Water and soap. If necessary, therapy can be consulted with the Toxicology Information Centre: the Toxicology Information Centre - Clinic for Occupational Diseases.