SAVO against Molds disinfectant, 500 ml

SAVO against Molds is a liquid spray product for the removal of molds, fungi, lichens, and yeasts throughout the household with immediate effect, visible results, and disinfecting properties.

It is suitable for plaster, masonry, stone, marble, granite, natural wood, ceramics, tiles, vitroceramics, enamel, glass, plastics, laminate, acrylic, vinyl, silicone, rubber, teflon, stainless steel, and chrome surfaces.

Properties of SAVO against Molds bathroom:

• No. 1 on the market*
• Removes mold after the first use
• Effective formulation
• Liquid disinfectant spray
• Disinfects the surface and beautifully whitens
• Proven quality
• SAVO for mold

* No. 1 in the Czech market in terms of the number of units sold among mold removal products according to data from AC Nielsen from March 2015 to March 2016.

SAVO against Molds usage:

Press the safety lock of SAVO against mold and simultaneously turn the spray nozzle to the working position. After use, repeat the process to the stop position. Some sprays may have a red safety latch. In that case, remove and discard this latch before the first use; the spray is then ready for use.

Spray SAVO against mold evenly from a distance of 10-15 cm and avoid excessive moistening of the surface. Leave the room and let it act for 15-20 minutes. Then rinse the treated area with water or let the product dry. Do not remove the mold before spraying to avoid dispersing dangerous spores. In cases of severe infestation, repeat the process if necessary after rinsing the product or after it dries. First, test the product on a small area to observe the surface reaction. Use only in well-ventilated areas. If any irritation occurs, stop using immediately, leave the room, and allow the product to dry.

Do not use on: anodized aluminum and linoleum. In case of doubt, for new or unusual surfaces, colored areas, or finished wood, finished metal, marble, vinyl, chrome surfaces (damaged or of low quality), and damaged surfaces, first test the product on a small inconspicuous area.

Composition of Savo for mold:

Disinfecting substance: sodium hypochlorite 4.7 g/100 g. Less than 5% bleaching agents based on chlorine (sodium hypochlorite), anionic surfactants.

Warning:

Use biocidal products safely. Always read the label and product information before use.

Product safety warnings (H-statements)

• EUH206: Attention! Do not use together with other products. May release dangerous gases (chlorine).

Safe handling instructions (P-statements)

• P102: Keep out of reach of children.
• P234: Keep only in the original container.
• P261: Avoid breathing dust/smoke/gas/mist/vapors/aerosols.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/protective eyewear/face shield.
• P303+P361+P353: IF ON SKIN (or hair): Remove all contaminated clothing immediately. Rinse skin with water/shower.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call a TOXICOLOGICAL INFORMATION CENTER/doctor.
• P391: Collect spillage.
• P501: Dispose of contents/container in accordance with product instructions.