SOICRAT universal building penetration 2802A, 5 kg

Universal penetrating coat for absorbent substrates (plaster, concrete, wood etc.) to reduce absorbency while improving the adhesion of the top coat with dispersion paint (Latex, Bakrylex enamel, Barlet acrylic, Bakrylex varnish). It also improves the properties of mortars and concretes. Soicrat building penetration is applied to a dry, dust and dirt-free substrate in one or two layers (depending on the absorbency of the substrate). The top coat can be applied after the penetration layer has dried. Depending on the absorbency and condition of the substrate being reinforced, it can be diluted in a ratio of 1 part penetration to 3 to 10 parts water.

Universal penetrating coat for absorbent substrates (lime-cement plasters, gypsum plasters, screeds, drywall, concrete, wood, etc.), which simultaneously improves the properties of concrete and mortars. It penetrates deep into the penetrated surface and ensures perfect anchoring of the top layer. Used under dispersion painting and facade paints, for dust-free surface treatment of concrete, for strengthening and increasing the water repellency of the surface.

Properties of SOICRAT 2802A building penetration:

• for painting and facade paints
• strengthening of the substrate
• reduction of paint consumption
• for absorbent and porous materials
• penetration on masonry
• packaging 5 kg

Technical properties of penetration:

• yield depending on the absorbency of the substrate and dilution up to 75 m²
• dilution depending on the absorbency and the condition of the substrate 1 part penetration 3 to 10 parts water
• applicable for lime-cement and gypsum plasters, screeds, concrete, self-leveling agents, drywall
• environment interior, exterior
• method of application brush, roller
• shade milky colored liquid
• Content of non-volatile substances min. 12%
• Volume weight g/cm3 1.00

Example of a painting procedure for penetration on masonry:

The product is applied to a dry, dust and dirt-free substrate in one or two layers (depending on the absorbency of the substrate) with a time interval of at least 4 hours drying of the penetration layer. The top coat can be applied after the penetration layer has dried (2 to 4 hours). The optimal temperature for painting is 15 to 25 °C.

Handling with penetration paint on masonry:

When working, observe basic hygiene rules. The product is not intended for painting surfaces in direct contact with food, animal feed, drinking water, or for painting children's toys and furniture. The product is treated with a biocide.

Storage life of universal penetration 2802A:

The product retains its useful properties for 5 years from the date of manufacture in the original unopened packaging. Store in a dry place at a temperature of 5 to 25 °C.

Disposal of coatings and penetration waste:

Dispose of containers with product residues in places designated by the municipality for collecting other waste. See also section 13 of the product safety data sheet.

Product safety warnings (H-phrases)

• EUH208: Contains (see hazardous substances). May cause an allergic reaction.