/currency.svg){kind=small}
/heart.svg){kind=small}
/user.svg){kind=small}
/cart.svg){kind=small}
Alkaprén 25 Plus glue for non-absorbent materials 50 ml
Code: 04593dnů:2
Date and method of delivery
Producer:
Matadorfix s.r.o
Alkaprén 25 Plus is a special based contact adhesive that is designed to bonding with non-absorbent Read more
Choose a discounted package
Quantity discounts
/envelope.svg){kind=small}
Query
/bell.svg){kind=small}
Watch
/share.svg){kind=small}
Share
PARAMETERS
Producer:
Code:
04593
ean:
8588000025015
Status:
Manufacturer:
Matadorfix s.r.o
Packaging:
40
Flammable:
Flammable
Health hazard:
Health hazard
Dangerous for the environment:
Dangerous for the environment
Description Alkaprén 25 Plus glue for non-absorbent materials 50 ml
Alkaprén 25 Plus is a special based contact adhesive that is designed to bonding with non-absorbent surface (eg. Rubber on rubber, metal, glass, etc.). The colors light beige. Adhesive Alkaprén 25 Plus each material is applied only once. Bonds is recommended to be burden or press. Mechanically the joint can be stressed to 24 hours after bonding.
Glue Alkaprén 25 Plus on each material is applied only once, either by spatula, spraying gun or brush. Before application of the adhesive is perfectly mixed. On each clean defatted material (smooth surface is recommended to roughen) Apply a thin layer of glue left to get cured and the surfaces are bonded. Bonds is recommended to be burden or press. Mechanically the joint can be stressed to 24 hours after bonding. Optimal bonding conditions are at 20 ° C. Hypothermia adhesive creates a bond with significantly lower strength. At temperatures lower than 5 ° C, gelation can occur. In this state, the glue is inapplicable. The original consistency can be achieved by gradual tempering in the room at a temperature of about 25 ° C. During tempering the glue. After tempering the glue original physical - mechanical properties. Do not temper by direct heating! At temperatures below 0 ° C glue coagulates irreversibly and can not be revived its adhesive ability. Density 0.86 g / cm3.
First Aid: Wash eyes or skin, wash with clean water, inhalation move to fresh air.
Note: Irritating to eyes and skin. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Harmful if swallowed can cause lung damage. Vapours may cause drowsiness and dizziness. Keep out of the reach of children. Keep away from sources of ignition - No smoking. Do not breathe vapor. Avoid contact with skin and eyes. Do not empty into drains. If swallowed, seek medical advice immediately and show this container or label. If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label.
| Flammable: | Flammable |
| Health hazard: | Health hazard |
| Dangerous for the environment: | Dangerous for the environment |
Alkaprene 25 Plus is applied only once to each material, either with a trowel, spray gun or brush.
The adhesive needs to be thoroughly mixed before application. A thin layer of adhesive is applied to each clean degreased material (smooth surfaces are recommended to be roughened), allowed to set and then the two surfaces are glued together. It is recommended that the bonded joint be weighted or pressed. The bonded joint can be mechanically stressed up to 24 hours after bonding. Optimum bonding conditions are at a temperature of 20 °C.
Subcooled adhesive produces a joint with significantly lower strength. If the temperature is below 5°C, gelation may occur. In this state, the adhesive is unusable. The original consistency is obtained by slow tempering in a room at a temperature of approx. 25 °C. The glue needs to be stirred several times during the tempering process. After curing, the adhesive has its original physical and mechanical properties. Do not temper by direct heating!
At temperatures below 0°C the adhesive irreversibly coagulates and it is not possible to revive its bonding properties.Density 0.86 g/cm3.
Hořlavé
Nebezpečí
Extrémně hořlavý plyn. Hořlavý plyn. Extrémně hořlavý aerosol. Hořlavý aerosol. Vysoce hořlavá kapalina a páry. Hořlavá kapalina a páry. Hořlavá tuhá látka.
Varování. Pokyny pro bezpečné zacházení
Před použitím protřepat. Vyvarujte se přímému vdechování. Nestříkejte do otevřeného ohně nebo jiných zdrojů zapálení. Chraňte před teplem / jiskrami / otevřeným plamenem / horkými povrchy. – Zákaz kouření. Uchovávejte obal těsně uzavřený. Uchovávejte v chladu. Nevystavujte teplotě přesahující 50°C . Nádobka je pod tlakem: při zahřívání se může roztrhnout. Chraňte před slunečním zářením. Uchovávejte mimo dosah dětí.
Nebezpečnost pro zdraví - dráždivé látky
Nebezpečí
Může způsobit podráždění dýchacích cest. Může způsobit ospalost nebo závratě. Může vyvolat alergickou kožní reakci. Způsobuje vážné podráždění očí. Dráždí kůži. Zdraví škodlivý při požití. Zdraví škodlivý při styku s kůží. Zdraví škodlivý při vdechování. Rozkladem ozonu v horních vrstvách atmosféry poškozuje veřejné zdraví a životní prostředí.
Varování. Pokyny pro bezpečné zacházení
Zamezte vdechování prachu/dýmu/plynu/mlhy/par/aerosolů. Používejte pouze venku nebo v dobře větraných prostorách. Při vdechnutí: přeneste postiženého na čerstvý vzduch a ponechte jej v klidu v poloze usnadňující dýchání. Při požití: necítíte-li se dobře, volejte TOXIKOLOGICKÉ INFORMAČNÍ STŘEDISKO nebo lékaře. Používejte ochranné rukavice / ochranný oděv / ochranné brýle / obličejový štít. Při styku s kůží: omyjte velkým množstvím vody a mýdla. Při zasažení očí: několik minut opatrně vyplachujte vodou. Vyjměte kontaktní čočky, jsou-li nasazeny, a pokud je lze vyjmout snadno. Pokračujte ve vyplachování. Při používání tohoto výrobku nejezte, nepijte ani nekuřte. Uchovávejte mimo dosah dětí.
Nebezpečné pro životní prostředí
Nebezpečí
Vysoce toxický pro vodní organismy, s dlouhodobými účinky. Toxický pro vodní organismy, s dlouhodobými účinky.
Varování. Pokyny pro bezpečné zacházení
Zabraňte uvolnění do životního prostředí. Uniklý produkt seberte. Uchovávejte mimo dosah dětí.
Documents
Bezpečnostní list
/document.svg){kind=small}
Related products
Code:
2507548
63.22 EUR
In stock
/heart.svg){kind=small}
Favorite/compare.svg){kind=small}
ComparePATTEX Chemoprén Universal is a contact adhesive designed for professional use, suitable for bonding a wide range of absorbent and non-absorbent materials.
-9%Discount
Code:
2504450
5.88 EUR
6.48 EUR
In stock
FavoriteCompareIt is suitable for glazing work, carpentry, skylight installations, impervious joints and expansion joints, cracks and fissures, shower curtains, glass blocks, sandwich panels and insulation, metal and plastic parts, caravans and boats.
-8%Discount
Code:
2601413
2.42 EUR
2.63 EUR
In stock
FavoriteCompareChloroprene adhesive that becomes transparent when dried. It can be used for gluing mirrors, foam polystyrene, and foam materials in general, without damaging surfaces.
Code:
2503190
6.73 EUR
In stock
FavoriteCompareIt is suitable for use in households and industries (locking screws and nuts of toys, bicycles, cars, motorcycles, lawn mowers, eyeglass frames, tools, kitchen shelves, etc.).
Code:
04655
100%
1.42 EUR
40.57EUR/1kg
In stock
FavoriteComparePurocel is a universal solution adhesive of the highest quality, providing very strong bonds, especially when bonding hard and soft PVC (novodur and imitation leather), foam, Barex, leather, rubber, and textiles.
Code:
2507569
6.95 EUR
In stock
FavoriteComparePattex Fix Power Self-Trigger – when you want to glue quickly, cleanly, and without compromise.
-7%Discount
Code:
2506300
5.16 EUR
5.52 EUR
In stock
FavoriteComparePATTEX Repair Sanitary Paint is a repair sanitary paint that is water-resistant after 30 minutes. It is suitable for porcelain, ceramics, tiles, glass, enamel, metals, and plastics.
Code:
2506318
6.73 EUR
In stock
FavoriteComparePATTEX One For All UNIVERSAL is a flexible mounting adhesive and sealant for indoor and outdoor use with FlexTec formulation. It features high final strength and elasticity of the bond.
Code:
2503191
4.10 EUR
In stock
FavoriteCompareAdhesive for quickly bonding crystal and glass to each other or with other solid materials. Designed for bonding flat or perfectly fitting surfaces.
Code:
2600545
5.06 EUR
In stock
FavoriteComparePATTEX Fix Mirrors & Panels is a FlexTec-based mounting adhesive, especially suitable for gluing mirrors, glass, and glass panels, cladding boards and panels, painted surfaces, and other materials.
-8%Discount
Code:
2506349
16.56 EUR
17.99 EUR
In stock
FavoriteCompareHot glue is ideal for a wide range of applications at home, for quick repairs, and for arranging flowers and decorations.
Code:
62588
13.50 EUR
16.88EUR/1l
In stock
FavoriteCompareFor contact bonding with very high strength. Especially for bonding leather, wood, rubber, textiles, metals, plywood, cardboard, and various materials made of hard plastics. For bonding insulation materials in areas exposed to higher temperatures.
Variants of this product
Code:
04589
100%
1.53 EUR
30.6EUR/1l
In stock
FavoriteCompareRubber, toluene-free contact adhesive in light beige color, designed for bonding absorbent materials with non-absorbent ones (e.g., rubber - concrete, leather - rubber, laminate - wood).
Code:
2503688
45.20 EUR
In stock
FavoriteCompareRubber toluene-free contact adhesive in light beige color, designed for bonding absorbent materials with non-absorbent ones (e.g. rubber - concrete, leather - rubber, laminate - wood).
Code:
2503207
171.86 EUR
In stock
FavoriteCompareRubber toluene-free contact adhesive in light beige color, designed for bonding absorbent materials with non-absorbent ones (e.g. rubber - concrete, leather - rubber, laminate - wood).
Code:
2503684
13 EUR
In stock
FavoriteCompareRubber toluene-free contact adhesive light beige in color, designed for bonding absorbent materials with non-absorbent ones (e.g. rubber - concrete, leather - rubber, laminate - wood).
Code:
2503683
6.59 EUR
In stock
FavoriteCompareRubber toluene-free contact adhesive of light beige color, designed for bonding porous materials with non-porous ones (e.g., rubber - concrete, leather - rubber, chipboard - wood).
