Bio-Enzyme Bio-P3 Biological Agent for Unclogging Pipes and Reducing Odor 100 g Restores Natural Decomposition Process

The BIO-P3 application liquid is applied by pouring it into the designated area (drain). It is necessary that the solution remains on the treated area for a minimum of 8 hours. In case of completely blocked pipes, mechanical unclogging is necessary first. To avoid this problem with completely blocked pipes, it is advisable to use BIO-P3 as a preventive measure. Use the stirred solution within a maximum of 1 hour from the start of preparation.

Preparation of the application liquid:
Dissolve and mix the contents of the bag in 2 l of warm water (approx. 30 - 40 °C ) and leave to activate for approx. 15 - 30 minutes with occasional stirring. Use the mixed solution within a maximum of 1 hour from the start of preparation.

Dosage:
100 g (i.e. 1 packet) / 1 drain (waste) / 2 l of warm water

Application notes:
Mix BIO-P3 in a plastic container with a non-metallic object.
It is recommended to apply the solution at night or preferably at the weekend.
At least 24 hours after application, do not use any chemical, disinfectant, bleaching agents, acids, alkalis, the use of which substantially reduces the effectiveness of the product.
Store BIO-P3 in a dry place and protect it from freezing.

These data are for information only. The seller is not liable for damages caused by improper use of the product.