Bison Car Mirror adhesive for rearview mirrors 2 ml
speciální transparentní lepidlo pro lepení zpětných zrcátek na bezpečnostní sklo
- Velmi pevné speciální transparentní lepidlo pro lepení zpětných zrcátek na bezpečnostní sklo.
- Sada je určena pro přilepení dvou zpětných zrcátek (obsahuje 2x mřížku a lepidlo).
- Lepidlo je určeno pro lepení zrcátek, která mají kovovou patku.
- Pokud lepíte Zrcátko s plastovou patkou, použijte BISON CAR TAPE.
- Odolává teplotám od -50°C do + 150°C.
ROZSAH POUŽITÍ:
Zpětná zrcátka s kovovou patkou.
Glued parts must be clean, dry and degreased.
- Mark the glued area on the safety glass.
- Cut the grille to the size of the rear-view mirror base.
- Apply sufficient glue to the rear-view mirror base and attach the wire mesh.
- Press the rear-view mirror onto the marked part of the safety glass and fix for at least 1 minute.
The bonded joint will reach handling strength after 15 minutes and functional strength after 72 hours. Remove uncured adhesive with acetone, cured adhesive only mechanically. Store in a dry and cool place.
IMPORTANT:
Do not use at temperatures below +10°C.
Contains: hydroxypropyl methacrylate, 2-Hydroxypropyl methacrylate mixture (CAS 923-26-2), hydroxypropyl ester of methacrylic acid (CAS 2761-09-3).
Keep out of the reach of children. Irritating to eyes, respiratory tract and skin. Avoid contact with skin and eyes. If eyes are affected, rinse immediately with Water and seek medical attention immediately. If skin is affected, wash thoroughly with plenty of Water. If swallowed, do not induce vomiting and seek medical attention immediately. Wear protective gloves.
This item has not been discussed yet. If you want to be first, click on the button Add a contribution
- Velmi pevné speciální transparentní lepidlo pro lepení zpětných zrcátek na bezpečnostní sklo.
- Sada je určena pro přilepení dvou zpětných zrcátek (obsahuje 2x mřížku a lepidlo).
- Lepidlo je určeno pro lepení zrcátek, která mají kovovou patku.
- Pokud lepíte Zrcátko s plastovou patkou, použijte BISON CAR TAPE.
- Odolává teplotám od -50°C do + 150°C.
ROZSAH POUŽITÍ:
Zpětná zrcátka s kovovou patkou.
Glued parts must be clean, dry and degreased.
- Mark the glued area on the safety glass.
- Cut the grille to the size of the rear-view mirror base.
- Apply sufficient glue to the rear-view mirror base and attach the wire mesh.
- Press the rear-view mirror onto the marked part of the safety glass and fix for at least 1 minute.
The bonded joint will reach handling strength after 15 minutes and functional strength after 72 hours. Remove uncured adhesive with acetone, cured adhesive only mechanically. Store in a dry and cool place.
IMPORTANT:
Do not use at temperatures below +10°C.
Contains: hydroxypropyl methacrylate, 2-Hydroxypropyl methacrylate mixture (CAS 923-26-2), hydroxypropyl ester of methacrylic acid (CAS 2761-09-3).
Keep out of the reach of children. Irritating to eyes, respiratory tract and skin. Avoid contact with skin and eyes. If eyes are affected, rinse immediately with Water and seek medical attention immediately. If skin is affected, wash thoroughly with plenty of Water. If swallowed, do not induce vomiting and seek medical attention immediately. Wear protective gloves.
