PATTEX Chemoprén Extrém contact adhesive in a tube, 120 ml

For contact bonding with very high strength. Especially for bonding leather, wood, rubber, textiles, metals, plywood, cardboard, and various materials made of hard plastics. For bonding insulation materials in areas exposed to higher temperatures (e.g. near heating).

Not suitable for bonding polystyrene, teflon, flexible PVC, PE, and PP. Do not use on joints that come into direct contact with food and drinking water.

Porous or overly absorbent materials (like chipboard, wood) should be coated at least once with Chemoprén Extrém diluted with Chemoprén Thinner in a ratio of 2:1 before bonding.

Areas of application:
Leather, wood, rubber, textile, metal, plywood, cardboard.

How to remove adhesive contamination?
If you have contaminated the vicinity of the bonded area or other objects with adhesive, don’t despair. Using Pattex Chemoprén Thinner, you can easily remove any fresh contamination.

Storage:
Store in the original sealed container in a dry place. Protect from temperatures below +10 °C and above +50 °C.

Surface preparation:
The bonded material must be clean, dry, free of grease and dust. When bonding smooth materials such as metal or plastics, roughening the bonded surfaces additionally will increase the strength of the joint.

Processing:
Before use, mix the adhesive thoroughly. Apply a thin layer with a notched spatula, brush, or roller to both surfaces. Allow the adhesive layer to ventilate for about 10 - 15 minutes, then bring both bonded parts together and press firmly. The strength of the joint is determined by the pressure force, not the duration of the pressure. Final strength is achieved after 24 hours.

Product safety warnings (H-phrases)

• H225: Highly flammable liquid and vapour.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long-lasting effects.

Safety handling instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapours/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P403: Store in a well-ventilated place.