PATTEX Chemoprén Universal Contact Adhesive, 800 ml

For universal contact bonding of various porous and non-porous materials, such as wood, plastics, rubber, leather, metal, glass, cork, cardboard, and many others. Porous or overly absorbent materials (hobra, wood) should be coated at least once with the Chemoprén Universal adhesive diluted with Chemoprén Thinner in a ratio of 2:1 before bonding. Not suitable for bonding extruded polystyrene, synthetic leather, softened PVC, PE, and PP.

Areas of application:
Wood, plastics, rubber, leather, metal, glass, cork, cardboard.

How to remove adhesive contamination?
If you have contaminated the area around the bonded surfaces or other items with adhesive, do not despair. You can easily remove all fresh contamination using Pattex Chemoprén Thinner.

Storage:
Store in the original closed container in a dry place. Protect from temperatures below +10 °C and above +50 °C.

Surface preparation:
The bonded material must be clean, dry, free of grease and dust. When bonding smooth materials such as metal or plastics, additional roughening of the bonded surfaces will increase the strength of the joint.

Processing:
Before use, mix the adhesive thoroughly. Apply a thin layer with a notched trowel, brush, or roller to both surfaces. Allow the adhesive layer to ventilate for about 10 - 15 minutes, then bring both bonded parts together and press them firmly. The strength of the joint depends on the pressure applied, not the duration of the pressure. Final strength is achieved after 24 hours.

Product safety warnings (H-statements)

• H225: Highly flammable liquid and vapor.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long lasting effects.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Protect from heat, hot surfaces, sparks, open flame, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapor/aerosol.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P403: Store in a well-ventilated place.