PATTEX Chemoprén Universal Contact Adhesive, 300 ml

For universal contact bonding of various absorbent and non-absorbent materials, such as wood, plastics, rubber, leather, metal, glass, cork, cardboard, and many others. Porous or excessively absorbent substrates (such as chipboard, wood) should be primed at least once with Chemoprén Universal adhesive, diluted with Chemoprén Thinner in a ratio of 2:1 before bonding. Not suitable for bonding extruded polystyrene, synthetic leather, flexible PVC, PE, and PP.

Areas of application:
Wood, plastics, rubber, leather, metal, glass, cork, cardboard.

How to remove adhesive contamination?
If you have contaminated the area around the bonded surface or other objects with adhesive, do not despair. Using Pattex Chemoprén Thinner, you can easily remove all fresh contamination.

Storage:
Store in the original closed container in a dry place. Protect from temperatures below +10 °C and above +50 °C.

Surface preparation:
The bonded material must be clean, dry, free of grease and dust. When bonding smooth materials, such as metal or plastics, additional roughening of the bonded surfaces will increase the strength of the joint.

Application:
Before use, mix the adhesive thoroughly. Apply in a thin layer with a notched trowel, brush, or roller to both surfaces. Allow the adhesive layer to vent for about 10 - 15 minutes, then align the two bonded parts and press firmly together. The strength of the joint is determined by the pressure applied, not the duration of the pressure. Final strength is achieved after 24 hours.

Product safety warnings (H-statements)

• H225: Highly flammable liquid and vapour.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapours/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P403: Store in a well-ventilated place.