PATTEX Chemoprén Universal Contact Adhesive in Tube, 120 ml

For universal contact bonding of various - absorbent and non-absorbent - materials, such as wood, plastics, rubber, leather, metal, glass, cork, cardboard, and many others. Porous or overly absorbent materials (e.g., chipboard, wood) should be painted at least once with Chemoprén Universal glue diluted with Chemoprén Thinner in a 2:1 ratio before bonding. Not suitable for bonding extruded polystyrene, synthetic leather, softened PVC, PE and PP.

Areas of use:
Wood, plastics, rubber, leather, metal, glass, cork, cardboard.

How to remove glue contamination?
If you have stained the vicinity of the glued surface or other objects with glue, do not despair. Using Pattex Chemoprén Thinner, you can easily remove all fresh contamination.

Storage:
Store in the original closed container in a dry place. Protect from temperatures below +10 °C and above +50 °C.

Surface preparation:
The material to be glued must be clean, dry, free of grease and dust. When gluing smooth materials such as metal or plastics, additional roughening of the glued surfaces will increase the strength of the joint.

Processing:
Before use, mix the glue thoroughly. Apply in a thin layer with a notched trowel, brush, or roller to both surfaces. Allow the glue layer to ventilate for about 10 - 15 minutes, then press both glued parts together firmly. The strength of the joint is determined by the pressure applied, not the duration of the pressure. Final strength is achieved after 24 hours.

Product Safety Information (H-phrases)

• H225: Highly flammable liquid and vapors.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long lasting effects.

Safe Handling Instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P403: Store in a well-ventilated place.