PATTEX Chemoprén Extrém contact adhesive, 300 ml

Designed for high-strength contact bonding. It is particularly well-suited for bonding leather, wood, rubber, textiles, metal elements, plywood, cardboard, and various hard plastics. It is also useful for fixing insulation materials in areas with higher thermal load (e.g., near heating elements).

Not suitable for bonding Teflon, polystyrene, soft PVC, PE, or PP. It is not intended for joints that come into direct contact with drinking water and food.

Pore-rich or highly absorbent materials (like hobra, wood) should preferably be coated with Chemoprén Extrém adhesive diluted with Chemoprén Thinner in a ratio of 2:1 at least once before gluing.

Areas of application:
Leather, wood, rubber, textiles, metal, plywood, cardboard.

How to remove adhesive contamination?
If you have soiled the surrounding area or other objects with adhesive, do not despair. With Pattex Chemoprén Thinner, you can easily remove all fresh contamination.

Storage:
Store in the original closed container in a dry place. Protect from temperatures below +10 °C and above +50 °C.

Surface preparation:
The material to be bonded must be clean, dry, free of grease and dust. When bonding smooth materials such as metal or plastics, additional roughening of the bonded surfaces will increase the strength of the joint.

Processing:
Mix the adhesive thoroughly before use. Apply a thin layer with a notched trowel, brush, or roller onto both surfaces. Allow the adhesive layer to ventilate for about 10 - 15 minutes, then bring the two bonded parts together and press firmly. The strength of the joint is determined by the pressure force, not the duration of the pressure. The final strength will be achieved after 24 hours.

Product safety warnings (H-statements)

• H225: Highly flammable liquid and vapor.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P403: Store in a well-ventilated place.