
The Pattex Repair Special Plastic Polyurethane Adhesive is an ideal choice for bonding both soft and hard plastics, as well as in combination with other materials such as wood, rubber, leather, ceramics, metal, or textiles. It is suitable for bonding plasticized and hard PVC, ABS, acrylic glass, polycarbonate, etc. It is not recommended for bonding PE, PP, PTFE (Teflon), and polystyrene.
Surface preparation for plastic adhesive:
The surfaces to be bonded must be dry, clean, and free of grease. If possible, roughen the surfaces before bonding.
Application of plastic adhesive:
Apply the adhesive evenly and in sufficient quantity to both surfaces to be bonded, and allow to ventilate for 5-10 minutes. After ventilation, a uniform film of adhesive will be visible on the surface. The adhesive must be dry to the touch and should not stick to fingers or form threads. After ventilation (maximum within 1 hour), press the two surfaces together. The strength of the bond does not depend on the length of compression (a few seconds is sufficient), but on the pressure applied.
Warning:
Process the material at temperatures between +18 °C and +25 °C. Clean tools immediately after use with a solvent or cleaning benzene. Dispose of any unused contents after curing in accordance with local waste disposal regulations. Small amounts can be added to household waste. Dispose of empty containers for recycling. Large quantities should be disposed of separately. Cooled or frozen adhesive can be fully reused if allowed to regain room temperature (approximately +20 °C). This does not reduce quality. During breaks, keep the adhesive well closed to prevent solvent evaporation. More information can be found in the product safety data sheet.
First aid:
If contact with skin occurs, wash with water and soap, and treat with a regenerating cream. In case of contact with eyes, rinse under running water for about 15 minutes and seek medical advice. If ingested, rinse the mouth, drink 1-2 glasses of water, and seek medical advice. If inhaled, move the affected person out of the contaminated area and consult a physician.
| Species: | ostatní |
| Health hazard: | Health hazard |
Nebezpečnost pro zdraví - dráždivé látky
Nebezpečí
Může způsobit podráždění dýchacích cest. Může způsobit ospalost nebo závratě. Může vyvolat alergickou kožní reakci. Způsobuje vážné podráždění očí. Dráždí kůži. Zdraví škodlivý při požití. Zdraví škodlivý při styku s kůží. Zdraví škodlivý při vdechování. Rozkladem ozonu v horních vrstvách atmosféry poškozuje veřejné zdraví a životní prostředí.
Varování. Pokyny pro bezpečné zacházení
Zamezte vdechování prachu/dýmu/plynu/mlhy/par/aerosolů. Používejte pouze venku nebo v dobře větraných prostorách. Při vdechnutí: přeneste postiženého na čerstvý vzduch a ponechte jej v klidu v poloze usnadňující dýchání. Při požití: necítíte-li se dobře, volejte TOXIKOLOGICKÉ INFORMAČNÍ STŘEDISKO nebo lékaře. Používejte ochranné rukavice / ochranný oděv / ochranné brýle / obličejový štít. Při styku s kůží: omyjte velkým množstvím vody a mýdla. Při zasažení očí: několik minut opatrně vyplachujte vodou. Vyjměte kontaktní čočky, jsou-li nasazeny, a pokud je lze vyjmout snadno. Pokračujte ve vyplachování. Při používání tohoto výrobku nejezte, nepijte ani nekuřte. Uchovávejte mimo dosah dětí.