APEKO wallpaper powder adhesive, up to 50 m², 250 g

Apeko w wallpaper powder adhesive that allows you to cover an area of up to 50 m², this package contains 250 g. The powder wallpaper adhesive from Apeko is suitable for gluing wallpapers made of paper, PVC wallpapers, and even reflective wallpapers. The aqueous solution of the wallpaper adhesive powder is used for gluing paper and PVC wallpapers, or for thickening water-based paints and adhesives.

Properties of Apeko wallpaper adhesive:

• high initial adhesion
• suitable for gluing paper wallpapers
• appropriate adhesive for vinyl wallpapers
• adhesive for wallpapers with easy correction and repair options
• solvent-free
• for gluing wallpaper to wall, concrete, wood, metal, plasters

For gluing reflective, paper, and PVC wallpapers with a paper backing in interiors on wood, metal, concrete, plaster, particle board materials, and similar substrates. At least one of the glued materials or substrates must be absorbent. The adhesive can also be used as a liquid sizing agent for painting preparations.

Substrate for wallpaper adhesive:

plasters, concrete, wood

Application of wallpaper adhesive:

Brush, roller.

Yield of wallpaper adhesive:

Up to 7 m²/kg.

For gluing paper wallpapers:

0.5 kg of wallpaper powder adhesive is added while constantly stirring into 8 liters of clean water. After let it dissolve for 10-15 minutes with occasional stirring, the adhesive for wallpapers is applied with a brush to both the wallpaper and the substrate in one layer. Wallpapers are glued from top to bottom and smoothed with a soft brush, sponge, or rubber roller; excess adhesive is removed with a damp sponge or cloth.

Example of the working procedure:

The substrate must be dry, free of non-adhering parts, dirt, and grease. The contents of the bag are gradually added to cold water while stirring continuously. After stirring, allow it to dissolve for 20-30 minutes while occasionally stirring.
The adhesive is diluted with cold water in the ratio: light wallpapers 1:20 (i.e., the bag in 5 liters of water), heavy wallpapers 1:16 (i.e., the bag in 4 liters of water).

When gluing paper wallpapers to plastic laminate, it is recommended to lightly sand the surface before application with sandpaper, diluting with water at a ratio of 1:16 (i.e., the bag into 4 l of water).
The prepared adhesive is applied to the wallpaper with a brush in an even layer so that 0.11 kg of adhesive is applied to 1 m² of wallpaper. After applying the adhesive, the wallpaper is folded with the coated side inwards and let rest for 5-15 minutes.
After the technological pause, the wallpaper is unfolded again and glued to the wall. The wallpaper is smoothed with a rubber roller or a soft brush after final positioning. After finishing the work, tools should be rinsed immediately with water.
While working, observe basic hygiene rules. The product retains its application properties in the original unopened packaging for 36 months from the date indicated on the packaging.

Warning:

In dissolved state, the substance is alkaline. Observing basic hygiene rules is recommended while working. The product is not intended for coatings that come into direct contact with food, animal feed, drinking water, or for coatings of children's toys and children's furniture. Keep out of reach of children. If you feel unwell, seek medical attention. The product is biocide-treated. Contains 1,3,5-tris(2-hydroxyethyl) hexahydro-1,3,5-triazine, reaction mixture: 5-
chlor-2-methylisothiazol-3(2H)-one [EC number 247-500-7] and 2-methylisothiazol-3(2H)-one [EC number 220-239-6] (3:1). May cause an allergic reaction.