
The liquid w wallpaper adhesive Apeko V1306 is designed for gluing paper, reflective, and PVC wallpapers with a paper backing indoors on plaster, wood, concrete, metal, agglomerated wooden substrates, and similar surfaces. The adhesive can also be used as a liquid sizing agent in painting mixtures.
Designed for indoor gluing of PVC wallpapers with a paper backing, paper wallpapers, and reflective wallpapers on metal, wood, plaster, concrete, agglomerated wooden materials, and similar substrates. At least one of the glued materials or substrates must be absorbent. The product can also serve as a liquid sizing agent in painting preparations.
Suitable for plaster, concrete, wood, metal, agglomerated wooden materials, and similar substrates. At least one of the glued materials or substrates must have an absorbent nature.
Brush, roller.
5 to 7 m²/kg.
Wallpaper adhesive is diluted with water. For substrate penetration 1:3, for paper wallpapers 2:1, for PVC wallpapers 3:1, for reflective wallpapers do not dilute.
Before applying the wallpapers, it is necessary to remove all dust, loose particles, and grease from all surfaces. Any old coatings in greater layers must be scraped off. Highly absorbent and crumbly surfaces must be pre-treated with suitable primer, e.g., BARLET, SOICRAT or diluted APEKO adhesive (dilute 1 part adhesive with 3 parts water).
Depending on the type of wallpaper, Apeko wallpaper adhesive is diluted with clean water before use. Water is added gradually while stirring continuously: paper wallpapers (2:1 with water, i.e., dilute 1 kg of adhesive with 0.5 liters of water), PVC wallpapers (3:1 with water, i.e., dilute 1 kg of adhesive with 0.33 liters of water), for reflective wallpapers do not dilute the adhesive.
After thorough mixing, the wallpaper adhesive is applied with a brush or roller to the center of the prepared wallpaper strip and spread to the sides. Immediately before gluing, the adhesive is also applied to the edge areas of the substrate. Subsequently, the strips are glued from top to bottom. The wallpaper must be pressed against the substrate with a brush, sponge, or roller downwards and sideways. All tools and any soiled areas should be washed immediately with water.
The wallpapers are cut to the required length before gluing. They are soaked in water for 3–10 minutes. Apeko V 1306 is applied to the prepared substrate, and after 2 minutes, gluing begins. The wallpapers are glued from top to bottom and smoothed with a soft brush, sponge, or rubber roller; excess adhesive is removed with a damp sponge or cloth. The glued wallpapers can be gently washed after 5 days (if they are varnished) with lukewarm water with added detergent. The temperature of the substrate and the surrounding environment must be at least +10 °C during application.
| Species: | ostatní |