APEKO liquid wallpaper glue, 1 l

Apeko V1306 is a liquid wallpaper glue for sticking reflective, paper, and PVC wallpapers with a paper backing in interiors on wood, metal, concrete, plaster, agglomerated wood materials, and similar substrates. The glue can also be used as a liquid adhesive for painting preparations.

Properties of Apeko wallpaper glue:

• high initial adhesion
• suitable for gluing paper wallpapers
• appropriate glue for vinyl wallpapers
• wallpaper glue with easy correction and the possibility for repairs
• solvent-free
• for gluing wallpaper to walls, concrete, wood, metal, plaster
• packaging 1 liter

For gluing reflective, paper, and PVC wallpapers with a paper backing in interiors on wood, metal, concrete, plaster, agglomerated wood materials, and similar substrates. At least one of the glued materials or substrates must be absorbent. The glue can also be used as a liquid adhesive for painting preparations.

Substrates for wallpaper glue:

On wood, metal, concrete, plaster, agglomerated wood materials, and similar substrates. At least one of the glued materials or substrates must be absorbent.

Applying wallpaper glue:

Brush, roller.

Yield of wallpaper glue:

5 to 7 m²/kg.

Dilution of wallpaper glue:

Wallpaper glue is diluted with water. For substrate penetration 1:3, for paper wallpapers 2:1, for PVC wallpapers 3:1, for reflective wallpapers it is not diluted.

Procedure for Apeko wallpaper glue:

Before applying the wallpaper, it is necessary to remove dust, loose particles, and grease from all surfaces. Any existing old coatings in larger layers must be scraped off. Highly absorbent and crumbling surfaces need to be pre-primed with a suitable primer such as BARLET, SOICRAT, or diluted APEKO glue (1 part glue diluted with 3 parts water).

Depending on the type of wallpaper, Apeko wallpaper glue should be diluted with clean water before use. Water should be added gradually while continuously mixing: paper wallpapers (2:1 with water, i.e., dilute 1 kg of glue with 0.5 liters of water), PVC wallpapers (3:1 with water, i.e., dilute 1 kg of glue with 0.33 liters of water), for reflective wallpapers the glue is not diluted.

After thorough mixing, the wallpaper glue is applied with a brush or roller to the center of the prepared wallpaper strip and spread to the sides. Immediately before gluing, the glue is also applied to the edge areas of the substrate. The strips are then glued from the top down. The wallpaper must be pressed against the substrate with a brush, sponge, or roller from top to bottom and to the sides. All tools and any dirty areas should be rinsed immediately with water.

Wallpapering procedure:

The wallpapers are cut to the required length before gluing. They are soaked in water for 3–10 minutes. The Apeko V 1306 is applied to the prepared substrate, and after 2 minutes the gluing starts. The wallpapers are glued from top to bottom and smoothed with a soft brush, sponge, or rubber roller; excess glue is removed with a damp sponge or cloth. The glued wallpapers can be gently washed after 5 days (if they are lacquered) with lukewarm water mixed with detergent. The temperature of the substrate and the environment must not be lower than +10 °C during application.

Handling wallpaper glue:

During work, follow basic hygiene rules. The product is not intended for coating surfaces that come into direct contact with food, animal feed, drinking water, or for coatings of children’s toys and furniture. Keep out of reach of children. If you feel unwell, seek medical assistance. The product is treated with a biocide. Contains 1,3,5-tris(2-hydroxyethyl) hexahydro-1,3,5-triazine, reaction mixture: 5-chloro-2-methylisothiazol-3(2H)-one [EC number 247-500-7] and 2-methylisothiazol-3(2H)-one [EC number 220-239-6] (3:1). May cause an allergic reaction.