PATTEX Neutral Silicone, Transparent, 280 ml

Single-component adhesive PATTEX Neutral Silicone is characterized by high quality and is intended for various assembly and construction activities in both indoor and outdoor environments. Its neutral chemical base does not release corrosive components, allowing application on metals, plastics, glass, wood, and alkaline substrates without the need for penetration (primer). It is a perfect choice for sealing expansion joints, window and door frames, during glazing, for facade joints, and technical constructions.

The product boasts excellent adhesion even to more demanding materials and easily withstands solvent-based and water-dilutable coatings. Once cured, it remains permanently flexible and highly resistant to moisture, UV rays, ozone, aging, and extreme weather conditions.

Due to its versatility, it finds application not only in the construction industry but also in electrical engineering, glassmaking, the automotive and marine industries. It is also suitable for sealing demanding connections under permanent load or materials such as insulating double glazing.

Main advantages of the product:

• Neutral base – a safe choice for metals and sensitive surfaces
• Excellent adhesion to the substrate without the use of a primer
• High resistance to moisture, aging, UV rays, and ozone
• Short drying time, permanent elasticity
• Tolerance to water-based and solvent-based coatings
• Versatile use indoors and outdoors
• Ideal for construction work, window manufacturing, industrial and technical joints

Before use:
Joints must be clean, dry, and free of dust and grease. Cut off the top of the cartridge above the thread and screw the nozzle onto the cartridge. The tip of the nozzle must be trimmed according to the width of the joint.
Insert the cartridge into the applicator gun. Apply silicone to the joints evenly.

Application:
Apply silicone into the joint. Then smooth it out using a spatula or a finger moistened with soapy water.
Do not recommend painting over – due to the elasticity of the sealant, it will not adhere.

Cleaning:
Remove adhesive residues immediately with a damp cloth. Cured material can only be removed mechanically.

Product safety warnings (H-statements)

• H226: Flammable liquid and vapor.
• H304: May be fatal if swallowed and enters airways.
• H317: May cause an allergic skin reaction.
• H318: Causes serious eye damage.
• H360d: May damage the fetus in the womb.
• H361f: Suspected of damaging fertility.
• H372: Causes damage to organs through prolonged or repeated exposure.
• H410: Very toxic to aquatic life with long-lasting effects.
• H412: Harmful to aquatic life with long-lasting effects.
• H413: May cause long-lasting harmful effects to aquatic life.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P262: Avoid contact with eyes, skin, or clothing.
• P273: Avoid release to the environment.
• P501: Dispose of contents/container in accordance with product instructions.