Hostagrund 2v1 S2160 blacksmith paint, 375 ml

Synthetic thixotropic paint with anti-corrosive and self-priming effect.

CHARACTERISTICS AND USE:

The paint is primarily intended for decorative coatings of blacksmith products, where an attractive "forged" appearance and long durability are required, e.g. blacksmith products such as grills, gates, wrought iron fences, doors, wrought iron furniture, cast iron sculptures, etc. The paint is resistant to the effects of weathering. It is also very suitable for creating single-layer outdoor (and indoor) coatings of steel structures exposed to direct weathering. The paint can also be used for coating absorbent substrates such as wood or masonry.

Key properties:

• impressive appearance with metallic sheen
• does not run when applied in a thicker layer
• combines the properties of both primer and top coat

SUBSTRATE PREPARATION:

The substrate designated for application must be mechanically cleaned, dry, clean, and free of dust, grease, and loose rust. First, the surface must be degreased with a suitable cleaning agent (e.g. BALTECH P6402 technical benzene, BALTECH P6401 acetone, or where possible, warm pressurized water with detergent). To remove any remaining salts, the substrate must then be washed with clean water. Coarse and firmly adherent dirt must be removed manually or mechanically (scraping, sanding). Any loose rust can also be removed manually or mechanically (metal brushes, sanding discs).
Absorbent substrates must first be treated with a suitable primer that ensures their uniform absorbency. Areas with previous coatings must be cleaned, degreased, and freed from original non-adhesive layers.

DILUTION: diluent BALTECH S6005

Theoretical coverage: ca 4.5 m²/ l for one layer depending on the method of application

WORKING PROCEDURE:

Before use, thoroughly stir the contents. Mixing disrupts the gel, and the paint becomes slightly liquid. The paint is ready for use; if necessary, the diluent 'BALTECH S6005 can be used for thinning. The coating must be applied so that the resulting thickness of the dry layer is at least 100 µm. If the recommended minimum thickness is not achieved in one spray or coat, another layer can be applied after 4 hours of drying of the previous layer, but no later than within 24 hours. The paint is applied with a brush or spraying.

You might need:
Brushes, rollers, abrasives, masking materials, spatulas, knives, buckets, and trays.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health in contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause organ damage with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P305+P351+P310: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call a TOXICOLOGICAL INFORMATION CENTER/doctor.
• P332+P313: If skin irritation occurs: Seek medical attention/treatment.
• P333+P313: If skin irritation or rash occurs: Seek medical attention/treatment.
• P403+P233: Store in a well-ventilated place. Keep container tightly closed.
• P501: Dispose of contents/container in accordance with product instructions.