Hostagrund 2v1 S2160 base and top coat for metal, 0840 reddish-brown, 600 ml

Self-priming anti-corrosive thixotropic synthetic paint

CHARACTERISTICS AND USE

HOSTAGRUND 2v1 FOR IRON S2160 is a base and top coat synthetic paint for iron. It is designed for creating single-layer outdoor coatings of steel structures, e.g. masts, bridges, chassis, fences, exposed to direct weather influences. It is also suitable for coatings of lightweight metals, e.g. galvanized sheets. The paint has excellent adhesion to steel surfaces and very fast drying even in thick layers. The thixotropic nature allows the paint to be applied in very thick layers, and high-pressure spraying can apply up to 300 µm of wet film at once. The paint can also be used for coating absorbent substrates such as wood or masonry. The coating film has a silky matte surface. It is produced in a wide range of shades (for bulk buyers also in RAL shades).

Key properties:

• suitable for corroded surfaces
• does not run during application in thick layers
• base and top coat in one

SUBSTRATE PREPARATION

The substrate for application must be clean, dry, free of grease, loose rust, and dust, and mechanically cleaned. First of all, the surface must be degreased using a suitable cleaning agent (e.g. BALTECH P6402 Technical gasoline, BALTECH P6401 Acetone or where possible warm pressurized water with detergent). To remove any residues of various salts, the surface must then be rinsed with clean water. Coarse and well-adhering dirt must be removed manually or mechanically (sanding, scraping). Any loose rust can also be removed manually or mechanically (metal brushes, grinding wheels). Absorbent substrates must first be primed with a suitable primer that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and freed from old non-adhering coatings.

Dilution: BALTECH S6005 (especially for cleaning tools). Application with a brush and airless spraying does not require thinning.

Theoretical coverage: approx. 4.5 m²/1 liter at a thickness of 100 µm depending on the method of application.

WORKING PROCEDURE

With an airless spraying device:
Before use, thoroughly mix the contents.
1x spray with HOSTAGRUND 2v1 FOR IRON S2160 so that the resulting thickness of the dry coating film is at least 100 µm.

With a brush:
Before use, thoroughly mix the contents. Stirring breaks down the gel and the paint becomes slightly liquid.
1 to 2x coat with HOSTAGRUND 2v1 FOR IRON S2160 so that the resulting thickness of the dry coating film is at least 100 µm. If necessary, additional sprays or coats can be applied after 4 hours of drying the previous layer, but no later than within 24 hours. Shade 0910 aluminum can only be applied with a brush without claim to aesthetic appearance.

Color shades:
0100 - white, 0101 - light gray, 0110 - medium gray, 0199 - black, 0243 - brown, 0280 - rosewood, 0440 - light blue, 0455 - dark blue, 0514 - light green, 0530 - medium green, 0540 - dark green, 0620 - medium yellow, 0840 - reddish-brown, 0910 - aluminum, 6200 - gas yellow

You may need:
Brushes, rollers, bruisers, covering material, spatulas, knives, buckets, and trays.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• H226: Flammable liquid and vapor.
• H312+H332: Harmful to health in contact with skin or when inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Protect from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P260: Do not breathe dust/fumes/gas/mist/vapors/aerosols.
• P261: Avoid breathing dust/fumes/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P305+P351+P310: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P332+P313: If skin irritation occurs: Get medical advice/attention.
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• P403+P233: Store in a well-ventilated place. Keep container tightly closed.
• P501: Dispose of contents/container to regulations.