Hostagrund 2v1 S2160 primer and top coat for metal, 0445 dark blue, 600 ml

Self-priming anti-corrosion thixotropic synthetic paint

CHARACTERISTICS AND USE

HOSTAGRUND 2v1 FOR IRON S2160 is a primer and top coat synthetic paint for iron. It is intended for the application of single-layer outdoor coatings for steel structures, e.g. poles, bridges, chassis, fences, exposed to direct weather conditions. It is also suitable for coating light metals, e.g. galvanized sheets. The paint has excellent adhesion to steel surfaces and very fast drying even in thick layers. The thixotropic nature allows the application of the paint in very thick layers, high-pressure spraying can apply up to 300 µm of wet film at once. The paint can also be used for coating absorbent substrates like wood or masonry. The coating film has a silky matte finish. It is available in a wide range of shades (for bulk buyers also in RAL shades).

Key properties:

• suitable for corroded surfaces
• does not run when applied in thick layers
• primer and top coat in one

SUBSTRATE PREPARATION

The substrate for application must be clean, dry, free of grease, loose rust, and dust, mechanically cleaned. First, the surface must be degreased using a suitable cleaning agent (e.g., BALTECH P6402 Technical benzene, BALTECH P6401 Acetone, or where possible hot high-pressure water containing detergent). To remove any residual salts, the surface must then be rinsed with clean water. Coarse and well-adhering dirt must be removed manually or mechanically (sanding, scraping). Any loose rust can also be removed manually or mechanically (wire brushes, grinding discs). Absorbent substrates must first be treated with a suitable primer that ensures uniform absorption of the substrate. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adhering coatings.

Dilution: BALTECH S6005 (especially for cleaning tools). Application with a brush and airless spraying is without dilution.

Theoretical coverage: approx. 4.5 m²/1 liter at a thickness of 100 µm depending on the application method.

WORKING PROCEDURE

With an airless spraying device:
Thoroughly mix the contents before use.
1 coat of HOSTAGRUND 2v1 FOR IRON S2160 so that the resulting thickness of the dry coating film is at least 100 µm.

With a brush:
Thoroughly mix the contents before use. Mixing breaks up the gel and the paint becomes slightly liquid.
1 to 2 coats of HOSTAGRUND 2v1 FOR IRON S2160 so that the resulting thickness of the dry coating film is at least 100 µm. If needed, additional coatings can be applied after 4 hours of drying of the previous layer, but no later than 24 hours. Shade 0910 aluminum can only be applied with a brush without demanding an aesthetic appearance.

Color shades:
0100 - white, 0101 - light gray, 0110 - medium gray, 0199 - black, 0243 - brown, 0280 - rosewood, 0440 - light blue, 0455 - dark blue, 0514 - light green, 0530 - medium green, 0540 - dark green, 0620 - medium yellow, 0840 – red-brown, 0910 - aluminum, 6200 - gas yellow

You might need:
Brushes, rollers, bruisivo, covering material, spatulas, knives, buckets, and trays.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause dryness or cracking of the skin.
• EUH208: Contains (see hazardous substances). May cause an allergic reaction.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health on skin contact or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause organ damage with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Protect from heat, hot surfaces, sparks, open flame and other sources of ignition. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Transport person to fresh air and keep at rest in a position comfortable for breathing.
• P305+P351+P310: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P332+P313: If skin irritation occurs: Seek medical attention/treatment.
• P333+P313: If skin irritation or rash occurs: Seek medical attention/treatment.
• P403+P233: Store in a well-ventilated place. Keep container tightly closed.
• P501: Dispose of contents/container in accordance with product instructions.