Hostagrund 2v1 S2160 primer and top coat for metal, 0199 black, 4 l

Self-priming anti-corrosive thixotropic synthetic paint

CHARACTERISTICS AND USE

HOSTAGRUND 2v1 FOR IRON S2160 is a primer and top coat synthetic coating for iron. It is designed for the application of single-coat outdoor coatings for steel structures, such as poles, bridges, chassis, fences, exposed to direct weather conditions. It is also suitable for coatings on light metals, such as galvanized sheets. The paint has excellent adhesion to steel surfaces and very fast drying even in thick layers. The thixotropic nature allows the paint to be applied in very thick layers, with high-pressure spraying capable of applying up to 300 µm of wet film at once. The paint can also be used for coating absorptive substrates such as wood or masonry. The coating film has a silky matte surface. It is produced in a wide range of shades (for wholesale customers also in RAL shades).

Key properties:

• Suitable for corroded surfaces
• Does not run when applied in thick layers
• Primer and top coat in one

SUBSTRATE PREPARATION

The substrate for application must be clean, dry, free of grease, loose rust, and dust, mechanically cleaned. First of all, the surface must be degreased using an appropriate cleaning agent (e.g., BALTECH P6402 Technical Benzene, BALTECH P6401 Acetone, or where possible, warm pressurized water with detergent). For the possible removal of residual salts, the surface must be rinsed with clean water. Coarse and well-adhering impurities must be removed manually or mechanically (sanding, scraping). Any loose rust can also be removed manually or mechanically (metal brushes, sanding discs). Absorbent substrates must first be primed with an appropriate primer that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and freed from old non-adhering coatings.

Dilution: BALTECH S6005 (especially for cleaning tools). Application with a brush and airless spraying is without dilution.

Theoretical yield: approx. 4.5 m²/1 liter at a thickness of 100 µm depending on the method of application.

APPLICATION PROCEDURE

With airless spray equipment:
Before use, thoroughly mix the contents.
1 coat of HOSTAGRUND 2v1 FOR IRON S2160 such that the resulting thickness of the dry coating film is at least 100 µm.

With a brush:
Before use, thoroughly mix the contents. Mixing breaks down the gel and the paint becomes slightly liquid.
1 to 2 coats of HOSTAGRUND 2v1 FOR IRON S2160 such that the resulting thickness of the dry coating film is at least 100 µm. If necessary, additional coats can be applied after 4 hours of drying of the previous layer, but no later than 24 hours. The shade 0910 aluminum can only be applied with a brush without regard to aesthetic appearance.

Color shades:
0100 - white, 0101 - light gray, 0110 - medium gray, 0199 - black, 0243 - brown, 0280 - rosewood, 0440 - light blue, 0455 - dark blue, 0514 - light green, 0530 - medium green, 0540 - dark green, 0620 - medium yellow, 0840 – red-brown, 0910 - aluminum, 6200 - gas yellow

You might need:
Brushes, rollers, bruisivo, covering material, spatulas, knives, buckets, and trays.

Safety warnings of the product (H-phrases)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• EUH208: Contains (see hazardous substances). May cause an allergic reaction.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health upon contact with skin or inhalation.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Precautions for safe handling (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P310: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call the POISON CENTER/doctor.
• P332+P313: If skin irritation occurs: Get medical advice/attention.
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• P403+P233: Store in a well-ventilated place. Keep container tightly closed.
• P501: Dispose of contents/container in accordance with product instructions.