Hostagrund Prim 3v1 S2177 base and top coat for metal, 0131 gray, 600 ml

Self-priming multifunctional synthetic paint. Base and top coat anti-corrosive matt paint for metal.

CHARACTERISTIC AND USE:

Single-layer matte paint combining the properties of a base anti-corrosive coating, intermediate layer, and at the same time top coat. It is intended for direct application on metals in both outdoor and indoor environments. The metal paint is ideal for coating steel materials, oxidized and freshly galvanized surfaces such as roofs, metallic structures, masts, fences, poles, gates, etc. The metal paint can also be used for coating absorbent substrates like wood and particle board. The Teflon contained in the paint creates a non-wetting layer on the surface of the coating that prevents dirt, atmospheric deposits, and water from sticking and affecting the coated surface. Therefore, the HOSTAGRUND 3v1 PRIM coating exhibits long durability, excellent weather resistance, and perfect barrier protection. It is available in a wide range of shades, and those who prefer a custom shade can use its tinting base for the possibility of creating an additional 5,000 shades.

Key properties:

• long-term resistance to weather influences
• barrier anti-corrosive protection
• contains Teflon

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free from grease, loose rust, and dust, and mechanically cleaned. First of all, the surface must be degreased using an appropriate cleaning agent (e.g., BALTECH P6402 TECHNICAL BENZENE, BALTECH P6401 ACETONE or wherever possible warm pressurized water with detergent content). To remove residues of various salts, the surface should then be rinsed with clean water. Rough and well-adhering dirt must be removed manually or mechanically (sanding, scraping). Any loose rust can also be removed manually or mechanically (metal brushes, sanding discs).
Pre-treatment of freshly galvanized sheets before painting: prepare a mixture of 10 l of water, 0.5 l of ammonia water (25% solution) and approximately 50 ml of wetting agent (detergent). This solution is applied to the treated sheet and after about 10 minutes of exposure, it is spread, e.g., with a polyester rag on a handle, until a metallic gray foam is formed. This is followed by a thorough rinse with clean water. The paint is applied after the sheet has completely dried. Absorbent substrates must first be impregnated with a suitable impregnator that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adhering coatings.

Dilution: BALTECH S6006

Theoretical yield: 10 - 12 m²/ l per one coat

WORKING PROCEDURE:

The paint is applied to the pre-prepared substrate. Before use, the paint is diluted with BALTECH S6006 thinner as needed and thoroughly mixed. It is applied in 2 to 3 layers depending on the expected environmental demands. The interval for applying individual layers is at least 24 hours. The recommended thickness of one dry layer is 30 – 40 µm. Shades 0912 aluminum and 0970 copper can be applied with a brush and roller only without claiming an aesthetic appearance. These shades are mainly intended for spraying.

You may find covering material useful, such as paper masking tape or masking film, or sanding papers. Don’t forget brushes and rollers.

Product safety warnings (H-phrases)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Dangerous respirable droplets may be produced during spraying. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health on skin contact or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long lasting effects.

Safe handling instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flame and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapours/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call the POISON CENTER/doctor/tel. 224 919 293 or 224 915 402 (24 hours a day)
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with the product instructions.