Hostagrund Prim 3v1 S2177 base and top coat for metal, 0131 gray, 4 l

Self-priming multifunctional synthetic paint. Base and top coat anti-corrosive semi-matte paint for metal.

CHARACTERISTICS AND USAGE:

Single-layer semi-matte paint combining the properties of a basic anti-corrosive coating, intermediate layer, and simultaneously top coat. It is intended for direct coatings of metals in outdoor and indoor environments. The metal paint is ideal for coatings of steel materials, oxidized and newly galvanized surfaces such as roofs, metal structures, masts, fences, poles, gates, etc. The metal paint can also be used for coating absorbent substrates such as wood and particle board. The Teflon contained in the paint creates a non-wetting layer on the surface of the coating, preventing dirt, atmospheric droplets, and water from adhering and affecting the coated surface. Therefore, the HOSTAGRUND 3v1 PRIM coating exhibits long durability, excellent weather resistance, and perfect barrier protection. It is available in a wide range of shades and for those who prefer an individual shade, a tinting base is available for the realization of an additional 5,000 shades.

Key properties:

• long-term resistance to weather influences
• barrier anti-corrosive protection
• contains Teflon

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free from grease, loose rust, and dust, and mechanically cleaned. First of all, the surface must be degreased using an appropriate cleaning agent (e.g., BALTECH P6402 TECHNICAL GASOLINE, BALTECH P6401 ACETONE, or where possible, warm pressurized water with detergent content). To remove any residual salts, the surface must then be rinsed with clean water. Coarse and well-adhered dirt must be removed manually or mechanically (sanding, scraping). Any loose rust can also be removed manually or mechanically (metal brushes, sanding discs).
Pre-treatment of the surface of freshly galvanized sheets before painting: prepare a mixture of 10 l of water, 0.5 l of ammonia water (25% solution), and about 50 ml of wetting agent (detergent). This solution is applied to the treated sheet and after about 10 minutes of action, it is spread, for example, with a synthetic fleece rag on a handle until a metallic gray foam is formed. This is followed by a thorough rinse with clean water. The paint is applied after the sheet has dried completely. Absorbent substrates must first be treated with an appropriate primer that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and freed from old non-adhering coatings.

Dilution: BALTECH S6006

Theoretical yield: 10 - 12 m²/ l for one layer

WORKING PROCEDURE:

The paint is applied to the pre-prepared substrate. Before use, the paint is diluted with BALTECH S6006 thinner as needed and thoroughly mixed. It is applied in 2 to 3 layers depending on the expected environmental demands. The interval for applying individual layers is at least 24 hours. The recommended thickness of one dry layer is 30 - 40 µm. Shades 0912 aluminum and 0970 copper can be applied with a brush and roller only without any claim to aesthetic appearance. These shades are primarily intended for spray application.

You may find covering materials such as paper masking tape or masking film, possibly sanding papers. Don't forget brushes and rollers.

Product safety warnings (H-phrases)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Spraying may produce dangerous respirable droplets. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapor.
• H312+H332: Harmful to health on contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapor/aerosol.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call a POISON CENTER/doctor/tel. 224 919 293 or 224 915 402 (available 24 hours)
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with the instructions on the product.