Hostagrund Prim 3v1 S2177 primer and topcoat for metal, 0970 copper, 600 ml

Self-priming multifunctional synthetic paint. Primer and topcoat anti-corrosive satin paint for metal.

CHARACTERISTICS AND USE:

One-layer satin paint combining the properties of a basic anti-corrosive coating, intermediate layer, and simultaneously topcoat. It is intended for direct application on metals in outdoor and indoor environments. The metal paint is ideal for coating steel materials, oxidized and freshly galvanized surfaces such as roofs, metal structures, masts, fences, poles, gates, etc. The metal paint can also be used for coating absorbent substrates such as wood and particleboard. The Teflon contained in the paint creates a non-wetting layer on the surface of the coating, preventing dirt, air pollution, and water from adhering to and affecting the painted surface. Therefore, the HOSTAGRUND 3v1 PRIM coating has a long service life, excellent weather resistance, and perfect barrier protection. It is available in a wide range of shades, and for those who prefer an individual shade, its tinting base is available for the realization of an additional 5,000 shades.

Key properties:

• long-term resistance to weather influences
• barrier anti-corrosive protection
• contains Teflon

SUBSTRATE PREPARATION:

The surface for application must be clean, dry, free of grease, loose rust, and dust, and mechanically cleaned. First of all, the surface must be degreased using a suitable cleaning agent (e.g., BALTECH P6402 TECHNICAL BENZINE, BALTECH P6401 ACETONE, or where possible, hot pressurized water containing detergent). To remove any residues of various salts, the surface should be subsequently rinsed with clean water. Rough and well-adhering dirt must be removed manually or mechanically (sanding, scraping). Any loose rust can also be removed manually or mechanically (metal brushes, grinding discs).
Pre-treatment of the surface of freshly galvanized sheets before painting: prepare a mixture of 10 l of water, 0.5 l of ammonia water (25%), and about 50 ml of wetting agent (detergent). This solution is applied to the treated sheet and after about 10 minutes of action is spread, e.g., with a synthetic fur cloth on a handle, until a metallic gray foam is formed. A thorough rinse with clean water follows. The paint is applied after the sheet has completely dried. Absorbent substrates must first be treated with a suitable primer to ensure uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adhering coatings.

Dilution: BALTECH S6006

Theoretical coverage: 10 - 12 m²/ l per one coat

WORK PROCEDURE:

The paint is applied to the pre-prepared surface. Before use, the paint is diluted with BALTECH S6006 thinner as needed and thoroughly mixed. It is applied in 2 to 3 layers depending on the expected harshness of the environment. The interval for applying individual layers is at least 24 hours. The recommended thickness of one dry layer is 30 – 40 µm. Shades 0912 aluminum and 0970 copper can be applied with a brush and roller only without claiming an aesthetic appearance. These shades are mainly intended for spraying applications.

You may find covering material such as paper adhesive tape or covering foil or possibly sanding papers. Don't forget brushes and rollers.

Product safety warning (H-statements)

• EUH208: Contains (see hazardous substances). May cause an allergic reaction.
• EUH211: Warning! Dangerous respirable droplets may be created during spraying. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health upon skin contact or inhalation.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause organ damage with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call the POISON CENTER/doctor.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with local regulations.