Hostagrund Prim 3v1 S2177 base and top coat for metal, 0620 yellow, 600 ml

Self-priming multifunctional synthetic paint. Base and top coat anti-corrosive satin paint for metal.

CHARACTERISTICS AND USE:

Single-layer satin paint combining the properties of a base anti-corrosive coating, intermediate layer, and top coat. It is designed for direct application on metals in both outdoor and indoor environments. The paint for metal is ideal for coatings of steel materials, oxidized and freshly galvanized surfaces such as roofs, metal constructions, poles, fences, columns, gates, etc. The paint for metal can also be used for absorbing substrates such as wood and particleboard. The Teflon contained in the paint creates a non-wetting layer on the surface of the coating, which prevents dirt, airborne debris, and water from sticking and affecting the coated surface. Therefore, the HOSTAGRUND 3v1 PRIM coating exhibits long durability, excellent weather resistance, and perfect barrier protection. It is available in a wide range of shades, and for those who prefer a custom shade, its tinting base is available for creating an additional 5,000 shades.

Key properties:

• long-term resistance to weather effects
• barrier anti-corrosive protection
• contains Teflon

PREPARATION OF THE SUBSTRATE:

The substrate for application must be clean, dry, free from grease, loose rust, and dust, and mechanically cleaned. First of all, the surface must be degreased using a suitable cleaning agent (e.g. BALTECH P6402 TECHNICAL BENZINE, BALTECH P6401 ACETONE, or where possible warm pressurized water with detergent). To remove any residues of various salts, the surface must then be rinsed with clean water. Coarse and well-adhering dirt must be removed manually or mechanically (by sanding or scraping). Any loose rust can also be removed manually or mechanically (using metal brushes or sanding discs).
Pre-treatment of the surface of freshly galvanized sheets before painting: prepare a mixture of 10 l of water, 0.5 l of ammonia water (25% solution), and about 50 ml of wetting agent (detergent). This solution is applied to the treated sheet and after about 10 minutes it is spread, e.g. with a cloth made of artificial fleece on a handle, until a metallic gray foam is formed. It is followed by a thorough rinse with clean water. The paint is applied after the sheet has completely dried. Absorbent substrates must first be flooded with a suitable impregnation agent that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and freed from old non-adhering coatings.

Dilution: BALTECH S6006

Theoretical coverage: 10 - 12 m²/ l for one coat

WORKING PROCEDURE:

The paint is applied to the pre-prepared substrate. Before use, the paint is diluted with BALTECH S6006 thinner as needed and thoroughly mixed. It is applied in 2 to 3 coats depending on the expected severity of the environment. The interval for applying individual layers is at least 24 hours. The recommended thickness of a single dry layer is 30 – 40 µm. Shades 0912 aluminum and 0970 copper can only be applied with a brush and roller without the expectation of aesthetic appearance. These shades are mainly intended for spraying applications.

You may find covering materials, such as paper masking tape or covering foil, plus sanding papers. Don't forget brushes and rollers.

Product Safety Warnings (H-statements)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Dangerous respirable droplets may be formed when spraying. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health upon contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs through prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safe Handling Instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Protect from heat, hot surfaces, sparks, open flame and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Prevent release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with local regulations.