Hostagrund Prim 3v1 S2177 base and top coat for metal, 0570 green, 2.5 l

Self-priming multifunctional synthetic paint. Base and top coat anti-corrosive satin paint for metal.

CHARACTERISTICS AND USE:

Single-layer satin paint combining the properties of a base anti-corrosive coating, intermediate layer, and at the same time top coat. It is intended for direct application to metals in outdoor and indoor environments. The metal paint is ideal for coating steel materials, oxidized and freshly galvanized surfaces such as roofs, metal structures, masts, fences, poles, gates, etc. The metal paint can also be used for coating absorbent substrates such as wood and particle board. The Teflon contained in the paint creates a non-wettable layer on the surface of the coating, which prevents dirt, air-borne debris, and water from adhering to and affecting the coated surface. Therefore, the HOSTAGRUND 3v1 PRIM coating exhibits long durability, excellent weather resistance, and perfect barrier protection. It is available in a wide range of shades, and those who prefer an individual shade can use its tinting base for the possibility of creating an additional 5,000 shades.

Key properties:

• long-term resistance to weather influences
• barrier anti-corrosive protection
• contains Teflon

SUBSTRATE PREPARATION:

The surface for application must be clean, dry, free from grease, loose rust, and dust, and mechanically cleaned. First of all, the surface must be degreased using an appropriate cleaning agent (e.g. BALTECH P6402 TECHNICAL BENZINE, BALTECH P6401 ACETONE, or where possible, warm pressurized water with detergent). To remove any residues of various salts, the surface must then be rinsed with clean water. Coarse and well-adhering contaminants must be removed manually or mechanically (grinding, scraping). Any loose rust can also be removed manually or mechanically (metal brushes, abrasive discs).
Pre-treatment of the surface of freshly galvanized sheets before painting: a mixture of 10 l water, 0.5 l ammonia water (25%) and approx. 50 ml wetting agent (detergent) is prepared. This solution is applied to the treated sheet and after about 10 minutes of action, it is spread, e.g. with a synthetic fleece cloth on a handle, until a metallic gray foam is formed. Followed by thorough rinsing with clean water. The paint is applied after the sheet has completely dried. Absorbent substrates must first be saturated with an appropriate impregnating agent that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and freed from old non-adhering coatings.

Dilution: BALTECH S6006

Theoretical yield: 10 - 12 m²/ l for one layer

WORKING PROCEDURE:

The paint is applied to the pre-prepared surface. Before use, the paint is diluted with BALTECH S6006 thinner as needed and thoroughly mixed. It is applied in 2 to 3 coats depending on the expected environmental demands. The interval for applying individual layers is at least 24 hours. The recommended thickness of a dry coat is 30 – 40 µm. Shades 0912 aluminum and 0970 copper can be applied with a brush and roller only without claiming aesthetic appearance. These shades are mainly intended for spraying applications.

Covering materials such as paper masking tape or masking foil, possibly sandpapers. Don’t forget brushes and rollers.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Dangerous respirable droplets may be created during spraying. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health on contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safety instructions for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid inhalation of dust/fumes/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Transfer person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with manufacturer's instructions.