Hostagrund Prim 3v1 S2177 base and top coat for metal, 0155 anthracite, 4 l

Self-priming multifunctional synthetic paint. Base and top anti-corrosive semi-matt paint for metal.

CHARACTERISTICS AND USE:

Single-layer semi-matt paint combining the properties of a basic anti-corrosive coating, intermediate layer, and at the same time a top coat. It is intended for direct application on metals in both outdoor and indoor environments. The paint for metal is ideal for coatings of steel materials, oxidized and fresh galvanized surfaces such as roofs, metal structures, masts, fences, poles, gates, etc. The paint for metal can also be used on absorbent substrates such as wood and particle board. The Teflon contained in the paint creates a non-wettable layer on the surface of the coating, which prevents dirt, atmospheric drops, and water from adhering and affecting the painted surface. Therefore, the HOSTAGRUND 3v1 PRIM coating exhibits long durability, excellent weather resistance, and perfect barrier protection. It is available in a wide range of shades and for those who prefer a custom shade, a tinting base is available for realizing another 5,000 shades.

Key properties:

• long-term resistance to weather effects
• barrier anti-corrosive protection
• contains Teflon

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free from grease, loose rust, and dust, and mechanically cleaned. First of all, the surface must be degreased using a suitable cleaning agent (e.g. BALTECH P6402 TECHNICAL GASOLINE, BALTECH P6401 ACETONE, or where possible, warm pressurized water containing detergent). In case of removal of residues of various salts, the surface must then be rinsed with clean water. Coarse and well-adhering dirt must be removed manually or mechanically (by sanding, scraping). Any loose rust can also be removed manually or mechanically (with wire brushes, sanding discs).
Pre-treatment of freshly galvanized sheets before painting: a mixture of 10 l of water, 0.5 l of ammonia water (25%) and about 50 ml of wetting agent (detergent) is prepared. This solution is applied to the treated sheet and after about 10 minutes of action, it is spread, e.g. with a synthetic wool cloth on a handle, until a metallic gray foam is formed. Following this, a thorough rinse with clean water is necessary. The paint is applied after the sheet has completely dried. Absorbent substrates must first be impregnated with a suitable primer that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and freed from old non-adhering coatings.

Dilution: BALTECH S6006 

Theoretical yield: 10 - 12 m²/ l for one layer

APPLICATION PROCEDURE:

The paint is applied to the pre-prepared substrate. Before use, the paint is diluted with BALTECH S6006 thinner as needed and thoroughly mixed. It is applied in 2 to 3 layers depending on the expected environmental stress. The interval for applying individual layers is at least 24 hours. The recommended thickness of one dry layer is 30 – 40 µm. Shades 0912 aluminum and 0970 copper can only be applied with a brush and roller without demanding an aesthetic appearance. These shades are primarily intended for spraying.

You might need cover materials, such as paper masking tape or covering foil, possibly sandpapers. Don’t forget brushes and rollers.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May cause allergic reactions.
• EUH211: Warning! When spraying, dangerous respirable droplets may be formed. Do not inhale aerosols or mists.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health upon contact with skin or inhalation.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Guidelines for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapours/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call the POISON CENTER/doctor/ tel. 224 919 293 or 224 915 402 (24 hours a day)
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with local regulations.