
Oil-based impregnation oil with linseed oil, designed primarily for the initial impregnation of wood, with excellent penetrating properties.
CHARACTERISTICS AND USE OF THE PRODUCT:
It is mainly used for the initial impregnation of wood, plasters, and other absorbent substrates, under subsequent coatings with oil, synthetic, or dispersion paints. It ensures perfect adhesion of topcoats, thus protecting the substrate from adverse weather effects.
Key properties:
• excellent penetration into wood
• suitable for other absorbent substrates (masonry, paper)
• traditional oil-based coating
SUBSTRATE PREPARATION:
The substrate wood must be clean, dry, finely sanded, with a moisture content of max. 12%, and free of resin residues before application. For wood species with higher resin content (larch, pine), all resin exudates must be removed first, for example, by washing with BALTECH C6000 thinner. The thoroughness of wood preparation affects the final appearance of the surface treatment and the overall lifespan of the coating system. Mineral substrates must be allowed to cure for at least 28 days before application, be properly dried and free of dust, must not exhibit contamination with grease or petroleum products, and must be isolated from ground moisture.
THINNER: BALTECH S6006
Theoretical coverage: approx. 7 m²/ l for one layer depending on substrate absorbency
APPLICATION PROCEDURE:
Before use, thoroughly mix the contents and dilute as necessary. It is applied with a brush, roller, or by dipping onto the pre-prepared substrate.
Colored wood coating:
- 1× coat with UNIBAL IMPREGNATING OIL O1000. After approximately 20 minutes, it is necessary to wipe off any excess oil to ensure that no glossy layer remains on the surface.
- after 48 hours of drying, sand the surface with sandpaper.
- 1 to 2× coat with base color UNIBAL COLOR OIL O2025.
- 1 to 2× coat with topcoat INDUSTROL UNIVERSAL S2013 or LAZUROL WINDOW PAINT U2015
| Species: | ostatní |