Lazurol Classic S1023 thin-layer wood stain with oil content, 0023 teak, 9 l

Synthetic oil wood stain

CHARACTERISTICS AND USE:

Wood stain S1023 is designed for protective staining coatings on soft and hard wood exposed to weather conditions as well as for interior applications. It protects wood from the effects of UV radiation. It contains natural oil. The wood stain penetrates deeply into the wood structure, enhancing its natural grain and thus providing highly effective coatings. It is characterized by very easy renewability of the old coating. Shade 0000 - colorless is intended only for indoor use!!

Examples of use: garden furniture, wooden gables, ceilings, wall and ceiling cladding, fences, cottages and wooden houses, windows, doors, cork, penetration of wooden floors.

Key features:

• contains natural oils
• penetrates deeply into the wood structure
• enhances natural grain
• provides excellent protection for soft and hard wood

SUBSTRATE PREPARATION:

The wood must be clean, dry, well-sanded, with a maximum moisture content of 12%, and free from resin residues before application. Wood with a high resin content (larch, pine) must be pre-treated to remove all resin exudations, e.g., by washing with BALTECH C6000 thinner. The quality of the wood pre-treatment affects the overall appearance of the final wood finish and the overall lifetime of the coating system.

The surface of wood intended for outdoor use must first be impregnated with a suitable fungicidal impregnating agent that ensures protection against mold, fungi, and insects, e.g., LAZUROL IMPREGNATION BASE S1033. The surface of wood intended for indoor use is best first treated with the colorless stain LAZUROL CLASSIC S1023. Penetration with colorless impregnating agent ensures uniform absorption of the substrate before further application of coating materials. Subsequently, the surface of the wood must be sanded with fine sandpaper and only then should the impregnating stain be applied. In the case of renovation coatings, the wood must be stripped of the old non-adherent layer, e.g., by sanding.

DILUTION: thinner BALTECH S6006 (especially for cleaning tools)

Theoretical coverage: 8 - 10 m²/l per coat depending on the absorbency of the substrate

WORKING PROCEDURE:

Apply with a brush after thorough mixing on the pre-prepared substrate. The stain does not need to be diluted, it is already in application viscosity. During work, the stain should be regularly stirred. For indoor use, it is applied in 1 to 2 layers; for outdoor coatings, it is advisable to use three layers, but only with colored shades. The colorless stain is intended for interior applications. Individual coats can be applied at intervals of 24 hours. To uniformly enhance the wood grain, it is advisable to wipe off the non-absorbed stain after 10 to 15 minutes of application using a dry brush or cloth.

For larger areas, always use material from the same production batch. When using the same production batch, the same color shade is guaranteed. The type, surface, and previous coating of the wood affect the final shade of the stain; therefore, we recommend performing a test coating before the final application. Claims for color shades will only be accepted with claims from the test area.
For high gloss, the dried coating made with LAZUROL CLASSIC S1023 can be overcoated with LAZUROL UNIVERSAL VARNISH S1002 or the natural shade of stain LAZUROL GOLD S1037. Floors can be overcoated with LAZUROL EXTERIOR WALKABLE VARNISH S1020.

Warning: Absorbent materials (rags, sawdust, papers, dust, etc.) soaked with stain must be disposed of safely, as they may self-ignite under certain conditions.

You may find covering materials such as paper masking tape or covering film useful. Don't forget brushes and rollers.

Safety warnings for the product (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.

Instructions for safe handling (P-statements)

• P102: Keep out of reach of children.
• P280: Wear protective gloves/protective clothing/eye protection/face shield.
• P302+P352: IN CASE OF CONTACT WITH SKIN: Wash with plenty of water and soap
• P403: Store in a well-ventilated place.
• P501: Dispose of contents/container according to the instructions on the product.