Lazurol S1002 gloss, lacquer for metal and wood, colorless, 750 ml

Wood lacquer synthetic highlighting wood grain. Universal lacquer with a glossy finish. Creates a durable, decorative protective layer resistant to abrasion, which protects wood from damage.

CHARACTERISTICS AND USE:

Universal lacquer with a glossy finish has excellent mechanical properties and high yield. The product is intended for top transparent coatings of wood and metal in interiors and exteriors, for example: lacquering wooden wall and ceiling paneling, fiberboard, metal accessories, wooden and metal railings.

SUBSTRATE PREPARATION:

Wood must be clean, dry, well-sanded, with a maximum moisture content of 12 % before application. Remove all resin exudations from wood with BALTECH C6000 thinner if the wood has a high resin content (larch, pine). The quality of the wood's pre-treatment affects the final appearance of the coating and its durability. First, treat the surface of the wood with a suitable primer that ensures uniform absorbency of the substrate and greater protection of the wood (in the case of using a fungicidal primer, it also protects against wood being attacked by molds, fungi, and insects). Then sand the surface of the wood with fine sandpaper, and apply the lacquer. The metal substrate must be clean, dry, free of grease, rust, dust, and mechanically cleaned.

DILUTION: Thinner BALTECH S6006

Theoretical yield: 14 to 17 m2/ 1 liter for one coat.

WORKING PROCEDURE:

Before use, thoroughly mix the lacquer! The lacquer is not diluted; it is provided in application viscosity for brush application. The lacquer is applied to the pre-prepared substrate.

Metal coating:

•  2-3x synthetic lacquer LAZUROL UNIVERSAL VARNISH S1002 at a 24-hour interval.

Wood coating:

• 1x synthetic primer LAZUROL CLASSIC S1023 or LAZUROL IMPREGNATING BASE S1033.
• 1-2x synthetic lacquer LAZUROL UNIVERSAL VARNISH S1002. The second and subsequent coats can be applied after 24 hours. The optimal thickness for one coat is 25 - 30 µm.

Warning:

During the application period and throughout the drying time, the minimum air and substrate temperature must be +10 °C, and a maximum of +40 °C. The optimal temperature for applying the coating is +18 °C to +23 °C and relative humidity of 40 to 70 %. Lower temperatures and higher relative humidity during application and drying and too thick a layer of the applied film significantly slow down the drying and curing of the coating film. We do not recommend applying the lacquer on hot summer days. High air temperatures cause the quick drying of the surface layer of the coating film and possible wrinkling of the film. Problems with the alignment of individual strokes of applied lacquer may also arise. The type, surface, and any previous coating of the wood affect the final shade of the coating. Natural wood changes color due to light regardless of the lacquer. This product is not suitable for coatings on floors and wood in permanently damp environments (e.g., saunas), wood treated with oils or waxes, or products containing waxes. Stackability and the joining of painted surfaces must be tested under specific conditions (climatic conditions, layer thickness, number of coats, shape of the substrate, type of substrate, etc.).

Product safety warning (H-phrases)

• EUH066: Repeated exposure may cause dry skin or cracking.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• H226: Flammable liquid and vapors.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H372: Causes damage to organs through prolonged or repeated exposure.
• H373: May cause damage to organs through prolonged or repeated exposure.
• H412: Harmful to aquatic life with long-lasting effects.

Safety handling instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fumes/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P501: Dispose of contents/container in accordance with local regulations.