Lazurol Aqua P UREX V1301 glossy durable wood varnish clear, 600 g

Acrylic-urethane water-dilutable wood varnish for interior use. The varnish is intended for creating a high-quality and durable surface on all types of wooden floors made of both hardwood and softwood in interiors. It can also be used for coating plywood, furniture parts, wooden paneling, cork, etc., or as a topcoat over dispersion paints.

It meets slip resistance requirements both in dry and wet conditions (ČSN 744507) for floors in all residential and living areas and also for parts of buildings used by the public – the average value of the coefficient of friction for the entire set must be at least 0.5. It complies with the conditions of ČSN EN 71-3, part 3: safety of toys. Migration of certain elements.

Properties of Lazurol Aqua P UREX V1301 durable wood varnish:

• Coverage 8 - 12 m² / kg in one coat.
• Application layer top transparent varnish.
• Application method brush, roller, spraying (including AIRLESS).
• Wood area (varnishes stains): wooden floors, wooden stairs, parquet, cork, varnished furniture, varnished doors.
• Environment exterior/interior: interior - indoor environment.

Application procedure:

Before use, thoroughly mix the varnish. The temperature of the environment during application must be between +15 °C and +25 °C. It is applied with a brush, roller, or by spraying. The wood surface to be varnished must be free of all dirt, dust, and old non-adhering coatings. Resinous spots must be cleaned with solvent and the surface carefully sanded with gradually finer sandpaper P80-100-120-150 (grit adjusted to the condition, type, and quality of the substrate). After removing any dirt caused by sanding, one layer of varnish diluted with a maximum of 10% water is applied. After 2 hours of drying, the surface should be lightly sanded with sandpaper P220-400. After again removing any dirt caused by sanding, two layers of undiluted varnish should be applied with an interval of 2-8 hours. If the time interval between the individual coats is more than 8 hours, light sanding with sandpaper P220-400 is recommended.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May cause an allergic reaction.
• H317: May cause an allergic skin reaction.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P333+P313: If skin irritation or rash occurs: Seek medical attention/treatment.
• P501: Dispose of contents/container according to the instructions on the product.