Lazurol S1119 boat varnish resistant varnish for wood colorless, satin 375 ml

The product treated with a satin varnish suitable for both indoor and outdoor use gains an elegant and sophisticated SATIN LOOK, whose surface is very pleasant to the touch. The satin varnish is available in the same packaging variants as its glossy version.

LAZUROL S1119 varnish is intended for decorative coatings of wooden construction elements exposed to moisture and water.

CHARACTERISTICS AND USE:

The varnish is intended for decorative glossy coatings of wooden construction elements, it is highly resistant to moisture and water. It is characterized by excellent workability, long-term protection against weather influences, and a satin finish. The varnish particularly enhances the grain of the wood. It is suitable, for example, for coatings of garden furniture, sports equipment, cork, wall coverings indoors and outdoors.

Key properties:

• Resistance to moisture and water
• UV resistant
• Enhances the natural wood grain
• Satin appearance
• Matte finish

SUBSTRATE PREPARATION:

The wood must be clean, dry, well-sanded, with a moisture content of a maximum of 12%, and free from resin residues before application. Wood with a high resin content (larch, pine) must be removed from all resin exudations beforehand, e.g., by washing with BALTECH C6000 thinner. The quality of the wood pre-treatment affects the overall appearance of the final wood finish and the overall durability of the coating system.
The surface of the wood must first be saturated with a suitable primer, which ensures uniform absorption of the substrate and higher protection of the wood (in the case of using a fungicidal primer, also protection against wood damage by fungi, mold, and insects). Subsequently, the surface of the wood must be sanded with fine sandpaper and only then should synthetic varnish be applied.

DILUTION:

thinner BALTECH S6006 (brushes, rollers), thinner BALTECH S6001 (spraying)

Theoretical coverage:

14 - 17 m²/ l for one coat

WORKING PROCEDURE:

Applied with a brush, roller, or by spraying after thorough mixing on a prepared substrate.
Wood coating
1. 1x coating with LAZUROL CLASSIC S 1023 or fungicidal primer LAZUROL IMPREGNATION BASE S1033
2. 2x coating with LAZUROL BOAT VARNISH S1119. The second and subsequent coats can be applied after 24 hours. The optimal thickness of one coat is 25-30 µm

Safety warnings for the product (H-phrases)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• EUH208: Contains (see hazardous substances). May cause an allergic reaction.
• H226: Flammable liquid and vapors.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.

Instructions for safe handling (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face shield.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P403: Store in a well-ventilated place.
• P501: Dispose of contents/container in accordance with local regulations.