Lazurol S1119 marine varnish clear, glossy 375 ml

LAZUROL S1119 varnish is intended for decorative coatings of wooden building elements exposed to moisture and water.

CHARACTERISTICS AND USE: 

The varnish is intended for decorative glossy coatings of wooden building elements, it is highly resistant to moisture and water. It is characterized by excellent workability, long-term protection against weather influences, and stable gloss. The varnish particularly enhances the grain of the wood. It is suitable for coatings on garden furniture, sporting equipment, cork, wall coverings in both interior and exterior.

Key properties:

• Resistance to moisture and water
• UV resistant
• Stable high gloss
• Enhances the natural grain of the wood

SUBSTRATE PREPARATION:

Wood must be clean, dry, well-sanded, with a moisture content of a maximum of 12%, and free from residues of resin before application. Wood with increased resin content (larch, pine) must be freed from all resin exudations in advance, e.g., by washing with BALTECH C6000 nitro thinner. The quality of the wood pre-treatment depends on the overall appearance of the final surface finish of the wood and also the overall durability of the coating system.
The surface of the wood must first be impregnated with a suitable impregnator, which ensures uniform absorbency of the substrate and greater protection of the wood (in the case of fungicidal impregnation, also protection against fungal, mold and insect attacks). Subsequently, the surface of the wood must be sanded with fine sandpaper and then the synthetic varnish can be applied.

DILUTION: diluent BALTECH S6006 (brushes, rollers), diluent BALTECH S6001 (spraying)

Theoretical coverage: 14 - 17 m²/L per coat

APPLICATION PROCEDURE:

It is applied with a brush, roller, or by spraying after thorough mixing on a previously prepared substrate.
Wood coating
1. 1x coating with LAZUROL CLASSIC S 1023 glaze or LAZUROL IMPREGNATING BASE S1033 fungicidal primer
2. 2x coating with LAZUROL MARINE VARNISH S1119. The second and subsequent coats of varnish can be applied after 24 hours. The optimal thickness of one coat of paint is 25-30 µmµ

Product Safety Warnings (H-statements)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• H226: Flammable liquid and vapors.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.

Safe Handling Instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P403: Store in a well-ventilated place.
• P501: Dispose of contents/container in accordance with local regulations.