Lazurol Aqua v1303 thick-layer semi-matt wood varnish, 2 kg

LAZUROL Aqua V1303 is a semi-matt thick-layer wood varnish, it is water-based, colorless, intended for new and renovation coatings of wooden products, especially in outdoor environments.

It is suitable for all types of wood, the film surface is perfectly flexible. The varnish is water-resistant, and the surface is non-sticky (antiblocking). It is not suitable for coating wooden floors and stairs. It contains an effective UV filter. It meets the requirements of ČSN EN 71 – 3, part 3: Safety of toys. Migration of certain elements.

Properties of LAZUROL wood varnish

• For all types of wood with dimensionally stable profiles
• Suitable for both interior and exterior environments
• Finishes: Semi-matt, transparent varnish. Color shades in the TELURMIX system.
• Coverage 6 to 8 m²/kg
• Dilutable with water
• Application method: brush or spraying
• Not suitable for coating wooden floors and stairs.
• Contains an effective UV filter.
• The varnish is water-resistant, and the surface is non-sticky (antiblocking).
• Meets the requirements of ČSN EN 71 - 3, part 3: Safety of toys. Migration of certain elements.

Example of wood varnish application procedure:

Dry raw wood (moisture max. 12%) should be sanded with sandpaper no. 120 - 150, resinous spots washed with thinner. For application on products for outdoor use, we recommend performing a priming coat containing fungicidal agents with the LAZUROL AQUA PRIMER V1314 or LAZUROL IMPREGNATING BASE S1033 (when using S1033, a technological pause of 48 hours is necessary).

After the primer has dried, lightly sand the surface with sandpaper no. 220 - 240 and remove dust. Before use, thoroughly stir the content. Apply 2 - 3 times with a brush or spraying with a time interval of 4 - 24 hours between coatings depending on the temperature and humidity. After the first coat has dried, it is advisable to sand with sandpaper no. 400. Recommended temperature for application is 15 to 25 °C.

Warning for LAZUROL wood varnish:

This product is not suitable for coating floors and wood in permanently damp environments (e.g., saunas), wood treated with oils or waxes, or products containing waxes. Stackability and re-coating of painted surfaces must be tested under specific conditions. The product is not intended for coatings that come into direct contact with food, animal feed, and drinking water.

Product safety warnings (H-statements)

• H317: May cause an allergic skin reaction.
• H412: Harmful to aquatic organisms, with long-lasting effects.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P321: Specific treatment (see … on the label).
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with local regulations.