Lazurol Gold S1037 thick-layer wood stain T020 chestnut, 2.5 l

Synthetic thixotropic wood stain.

CHARACTERISTICS AND USE:

LAZUROL GOLD S1037 wood stain is intended for long-term protective colored transparent coatings of soft and hard woods exposed to weather conditions and for interior coatings, e.g. garden furniture, wooden panels, ceilings, wall cladding, fences, cottages, and wooden houses. It creates an attractive (decorative) protective coating film on the surface of the wood that highlights the grain of the wood while simultaneously strengthening it and providing long-term protection against moisture and UV radiation.

Key properties:

• long-lasting durability
• does not run during application
• exclusive appearance

SUBSTRATE PREPARATION:

The wood must be clean, dry, well-sanded, with a moisture content of max. 12%, and free from resin residues before application. Wood with a high resin content (larch, pine) must be pre-treated to remove all resin exudates, for example, by washing with BALTECH C6000 thinner. The quality of the wood pre-treatment affects the overall appearance of the final wood finish as well as the overall lifespan of the coating system.
The surface of the wood must first be treated with an appropriate primer that ensures uniform absorbency of the substrate and greater protection of the wood (if using a fungicidal primer, also protection against mold, fungi, and insects). Subsequently, the surface of the wood must be sanded with fine sandpaper before applying the thick-layer stain.
For interior coatings, it is advisable to use colorless LAZUROL CLASSIC S1023 as the primer, and for exterior coatings, it is suitable to use LAZUROL IMPREGNATING BASE S1033 as the primer.
In the case of renovation coatings, the wood must be stripped of old non-bonding coatings and good adhesion of the substrate must be ensured (when completely removing the old coating, the new coating is applied gradually, including wood priming).

DILUTION: thinner BALTECH S6006 (especially for cleaning tools)

Theoretical coverage: 17 m2/1 liter for one coat depending on substrate absorbency

APPLICATION PROCEDURE:

Before use, mix thoroughly. LAZUROL GOLD is not diluted, applied with a brush or roller on a pre-prepared, primed, and lightly sanded wooden substrate in 2 to 3 coats, with the second coat being possible after 6 hours. Any sanding of the previous coat can be done after 24 hours. The application is made in the direction of the wood grain. Color shades are mutually mixable. The type, surface, and previous wood coating influence the final shade of the coating, so it is recommended to do a test coat before the final application. Complaints about color shades will only be accepted if a test coat was executed prior to realization and this was claimed with us.
For continuous areas, always use material from the same production batch. Using the same production batch ensures the same color shade. It is recommended to mix color shades from different batches in a larger container before application. The shade of the stain also depends on the number and thickness of the coatings (the color sample is made on sanded spruce wood, which received 3 brush coats according to the recommended procedure).
This product is not suitable for coating floors and wood in permanently damp environments (e.g. saunas), wood treated with oils or waxes, or products containing waxes.
If this product is used for treating wood with a high tannin content (acacia, oak, larch), a test coat must be performed first. Due to the high tannin content, slow drying, subsequent leaching of tannins, and overall affecting of the appearance of the coating film may occur.

Toning:
Other color shades are prepared by toning in the TELURMIX tinting system.

You may find covering materials, such as paper masking tape or covering foil, useful. Don’t forget about brushes and rollers.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.

Safe handling instructions (P-statements)

• P102: Keep out of reach of children.
• P270: Do not eat, drink, or smoke while using this product.
• P280: Wear protective gloves/protective clothing/protective eyewear/face shield.
• P302+P352: IN CASE OF CONTACT WITH SKIN: Wash with plenty of water and soap
• P403: Store in a well-ventilated place.
• P501: Dispose of contents/container according to the instructions on the product.