Lazurol Oknobal Email U2015 gloss topcoat for windows 6003 ivory, 600 ml

LAZUROL OKNOBAL EMAIL U2015 is a top synthetic paint for windows and doors.

CHARACTERISTICS AND USE:

The paint is intended for top glossy coatings of wood, especially wooden windows, doors, wooden frames, various cladding, ceilings, furniture (including garden furniture), etc. in interiors and exteriors. It is characterized by excellent mechanical properties, high opacity and UV resistance, excellent plasticity, very quick drying, and high gloss. The paint spreads well, does not form runs during application, and has excellent flow. The white shade is characterized by high whiteness.

Key properties:

• Extremely weather resistant
• Highly flexible and non-sticky coating
• Excellent flow
• Silky gloss

SUBSTRATE PREPARATION:

The wood must be clean, dry, well-sanded, with a moisture content of a maximum of 12%, and free of resin residues before application. Wood with a high resin content (larch, pine) must be freed from all resin exudations beforehand, e.g., by washing with nitro thinner C 6000. The quality of the wood pretreatment depends on the overall appearance of the final wood finish and the overall durability of the coating system. The surface of the wood must first be impregnated with a suitable wood preservative that ensures uniform substrate absorbency and higher wood protection (in the case of using a fungicidal wood preservative, it also protects against mold, fungi, and insects). Subsequently, the surface of the wood must be lightly sanded with fine sandpaper and then a primer for wood should be applied. In the case of renovation coatings, the wood must be freed from old non-adhesive coatings and ensure good substrate adhesion (if the old coating is entirely removed, the new coating is applied progressively, including wood impregnation). It is recommended to adhere to the entire coating system according to the manufacturer's data sheet.

DILUTION: diluent BALTECH S6006

Theoretical coverage: 15 - 17 m²/l per coat

APPLICATION PROCEDURE:

Before use, thoroughly mix the contents and dilute as needed. The paint is applied to the previously prepared substrate with a brush, roller, or spraying.

1. 1x coat with the colorless glaze LAZUROL CLASSIC S1023 or to achieve protection against wood-destroying fungi and mold, it is advisable to use LAZUROL IMPREGNATING BASE S1033 as an impregnation coat. Wipe off excess impregnator after 10 to 15 minutes with a cloth or dry brush
2. after 24 hours of drying, lightly sand with sandpaper
3. 1x coat with the primer PRAGOPRIMER PLUS S2070 or LAZUROL OKNOBAL BASE S2060, optimal film thickness of one layer 25 to 30 µm, drying time 6 hours
4. sanding with sandpaper
5. 1 to 2x coats of the top email LAZUROL OKNOBAL EMAIL U2015, optimal thickness of one coat 35 µm. To create long-lasting effectiveness of the coating, it is advisable to apply the email in two thinner layers. A coat thickness of 35 µm can be overcoated 10 hours after the first layer is applied at a temperature of 20 - 25 °C. For greater thickness, the interval between coats should be extended.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Dangerous respirable droplets may be formed when spraying. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapors.
• H317: May cause an allergic skin reaction.
• H336: May cause drowsiness or dizziness.

Safe handling instructions (P-statements)

• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Only use outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IN CASE OF CONTACT WITH SKIN: Wash with plenty of water and soap
• P333+P313: If skin irritation or rash occurs: Seek medical advice/attention.
• P501: Dispose of contents/container in accordance with product instructions.