Sinepox s2300 two-component primer paint for metal and steel, white + hardener, 1.18 kg

Two-component epoxy primer paint (white shade) containing anti-corrosive pigment is intended for priming steel and other metal substrates. It is also suitable for priming other materials (wood, silicate surfaces, selected plastics, etc.). The coat creates a highly adhesive layer providing anti-corrosive protection for the substrate. It can also be applied as an intermediate layer (primer coat).

Use:
Two-component epoxy primer paint containing anti-corrosive pigment. For producing primer coats on steel and other metal surfaces. Can be used for primer coats on other surfaces (wood, silicate surfaces, certain plastics, etc.). The paint creates a highly adhesive layer with anti-corrosive protection of the surface. The coat can be easily sanded. Excellent chemical and mechanical resistance, great adhesion and abrasion resistance, very good coverage of the coating. Simple and easy application. Not intended for coatings on surfaces that come into contact with food, feed, drinking water, or for painting children's furniture and toys. Can also be used in exteriors and interiors as a primer for both interior and exterior painting systems. SINEPOX S 2300, SINEPOX S 2300 HB, SINEPOX S 2321, SINEPUR U 2054 epoxy paints are intended for assembling coating systems in corrosive environments C4 and C5. We recommend following the composition of the coating system according to ČSN EN ISO 12944-5.

Surface preparation:

• Remove old coatings. The surface must be dry, free of dirt and grease.
• Roughen hot-dip galvanized steel and aluminum, or lightly blast (sweeping) and apply a wash primer (e.g., LAS 2688).
• Blast stainless steel to surface preparation grade Sa 2, medium surface profile (G), RZ = 50 μm. Surface preparation may also be done by manual and mechanized cleaning to St 2 or St 3.
• Substrate temperature: min. 15 °C and at least 3 °C above dew point.
• The uncured composition can be washed off tools with thinner SINEPOX S 6300 or Lignofix S 6300, or acetone.

Product safety warnings (H-statements)

• EUH205: Contains epoxy components. May produce an allergic reaction.
• H226: Flammable liquid and vapor.
• H302: Harmful if swallowed.
• H304: May be fatal if swallowed and enters airways.
• H312+H332: Harmful in contact with skin or if inhaled.
• H314: Causes severe skin burns and eye damage.
• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H318: Causes serious eye damage.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs through prolonged or repeated exposure.
• H410: Very toxic to aquatic life with long-lasting effects.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P264: Wash hands thoroughly after handling.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P310: Immediately call a POISON CENTER/doctor.
• P312: If you feel unwell, call a POISON CENTER/doctor.
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with local regulations.