Eternal In Thermo thermal insulating paint, 4 kg

Thermal insulating paint, prevents the transfer of cold from walls, the formation of mold, eliminates the manifestations of thermal bridges. ETERNAL IN Thermo is intended for surface treatment of interior walls made of core, mineral, and acrylic plasters and concrete panels to increase the surface temperature, e.g., on walls that become damp due to moisture condensation and form mold, in contact with surfaces that radiate unpleasant cold, or to eliminate thermal bridges.

ETERNAL IN Thermo is a water-dilutable coating prepared on the basis of water dispersion of acrylic copolymers, pigments, special thermal insulation filler, and other fillers and special additives. Coatings made with ETERNAL IN Thermo are washable and vapor-permeable, characterized by high opacity and thermal insulating properties.

Application:
ETERNAL IN Thermo is applied with a paintbrush, wide brush, or roller in at least two layers on a dry, degreased, clean, and cohesive surface so that consumption is at least 0.30 kg/m2. Highly absorbent substrates must be primed with ETERNAL universal primer or FORTE primer. A technological break of 4-8 hours is necessary between individual layers of paint depending on the temperature and humidity. The temperature of the substrate and the environment must be between 5 and 30 °C during application. The dried coating can be repainted with ETERNAL IN, ETERNAL IN plus dispersion paints without deterioration of thermal insulating properties.

Safety and hygiene at work:
By observing basic hygiene rules, ETERNAL IN Thermo does not endanger health. Appropriate work clothing, gloves, and protective glasses must be used when working. When spraying, respiratory organs must be protected with a suitable medium with a gas filter. Wash contaminated skin with water and soap, and rinse eyes immediately with plenty of water in case of contact. If irritation persists, seek medical attention. In case of ingestion, drink about 0.5 liters of lukewarm water with 10 crushed animal charcoal tablets, and seek medical attention if symptoms occur. Do not induce vomiting. If inhaled, transport the affected person to fresh air and ensure medical help, especially if symptoms persist. Detailed information is provided in the product Safety Data Sheet.

Consumption:
0.30 – 0.40 kg/m² (1–2 layers depending on the absorbency of the substrate)