Eternal In Thermo thermal insulation paint, 0.9 kg

Thermal insulation paint, prevents cold transfer from walls, mold formation, eliminates thermal bridge effects. ETERNAL IN Thermo is intended for surface treatment of indoor walls made of core, mineral and acrylic plasters and concrete panels to increase surface temperature, e.g., on walls that dampen and form mold due to moisture condensation, when contact surfaces radiate unpleasant cold or to eliminate thermal bridges.

ETERNAL IN Thermo is a water-dilutable coating prepared based on a water dispersion of acrylic copolymers, pigments, special thermal insulating fillers, and other fillers and special additives. Coatings made with ETERNAL IN Thermo are washable and vapor-permeable, characterized by high coverage and thermal insulation properties.

Application:
ETERNAL IN Thermo is applied with a paintbrush, wide brush, or roller in at least two layers on a dry, degreased, clean, and cohesive surface so that the consumption is at least 0.30 kg/m2. Highly absorbent substrates must be primed with ETERNAL universal primer or FORTE primer. A technological pause of 4-8 hours is necessary between individual layers of paint, depending on temperature and humidity. The temperature of the substrate and environment must be between 5 and 30 °C during application. The dried coat can be overcoated with ETERNAL IN, ETERNAL IN plus dispersion paints without compromising thermal insulation properties.

Safety and hygiene at work:
By adhering to basic hygiene rules, ETERNAL IN Thermo does not pose a health risk. Appropriate work clothing, gloves, and safety goggles must be used during work. When spraying, respiratory organs must be protected with an appropriate means with a gas filter. Wash contaminated skin with water and soap, and in case of eye contact, rinse immediately with plenty of water. If irritation persists, seek medical attention. In case of ingestion, drink about 0.5 liters of lukewarm water with 10 crushed tablets of activated charcoal, and if difficulties arise, seek medical help. Do not induce vomiting. In case of inhalation, transport the affected person to fresh air and ensure medical help, especially if symptoms persist. More detailed information is provided in the product's Safety Data Sheet.

Consumption:
0.30 – 0.40 kg/m² (1–2 layers depending on the absorbency of the substrate)