Eternal Stabil anti-slip paint for concrete floors and tiles, light gray, 5 kg

ETERNAL stabil is designed for the surface treatment of concrete surfaces, concrete tiles, concrete paving stones. It is suitable for the surface treatment of concrete floors in basements, staircases, warehouses, exhibition spaces, etc. ETERNAL stabil is certified for food contact in white and light gray shades. It reliably withstands normal loads, but is not suitable for surface treatment of floors subjected to shifting loads. The finished coating has a matte appearance and anti-slip treatment. The ETERNAL stabil coating can also be used to modify concrete surfaces on balconies, terraces, stairs, sidewalks, and similar areas. The final coat has very good abrasion resistance, good adhesion on concrete substrates, waterproofing properties, and very good weather resistance. ETERNAL stabil cannot be used for coatings permanently submerged in water or constantly exposed to high humidity. It is not recommended as a coating for highly smoothed surfaces without prior roughening.

Application:
ETERNAL stabil is applied in 2 layers with a break between coats of 4–24 hours depending on weather conditions. For more stressed concrete surfaces, it is advisable to apply 3 coats. ETERNAL stabil should not be diluted before use. The coated surface can be gradually loaded after three days, and can be fully loaded after seven days from the last coat application. The paint can be applied at temperatures between 10–30°C, and outdoor application should not be conducted under intense direct sunlight. The concrete substrate must be seasoned, dry, cohesive, repaired, and cleaned; new and smoothed concrete floors must be shot-blasted or sanded and primed with undiluted primer FORTE penetral.

Consumption:
0.40–0.50 kg/m2