Eternal Anticorrosive primer for metal, red-brown, 10 kg

ETERNAL anticorrosive acrylic is designed to protect metal constructions against corrosion as a primer. It is also suitable for mixed constructions where steel is in contact with new non-corroded galvanized sheet metal.

Application:
ETERNAL anticorrosive acrylic should be applied in 2 layers after proper mixing onto a well-cleaned metal substrate, free of any non-adhering old coats and corrosion residues (e.g., with a rotary steel brush) and degreased; use ETERNAL degreaser. The paint must be applied immediately after cleaning the substrate. It is not intended for spraying with electric vibration guns. The time between individual coats is 5 hours at 20°C. Coating of steel substrates should be done in a dry environment. The minimum temperature of the substrate and the environment during application is 10°C. In cold weather, it is advisable to first apply one very thin coat so that it dries quickly. The dried primer must be covered (1-2 layers) with a top coat, e.g., ETERNAL matte acrylic.

Consumption:
0.12–0.16 kg/m2 (1 layer)

Product safety warnings (H-statements)

• H301: Toxic if swallowed.
• H302: Harmful if swallowed.
• H311: Toxic in contact with skin.
• H312: Harmful in contact with skin.
• H314: Causes severe skin burns and eye damage.
• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H319: Causes serious eye irritation.
• H331: Toxic if inhaled.
• H332: Harmful if inhaled.
• H400: Very toxic to aquatic life.
• H410: Very toxic to aquatic life with long-lasting effects.
• H412: Harmful to aquatic life with long-lasting effects.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P273: Avoid release to the environment.
• P501: Dispose of contents/container according to product instructions.